The 383/Phamspeed Build Begins!
#41
TECH Junkie
iTrader: (9)
Join Date: Apr 2005
Location: Miami, FL
Posts: 3,472
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ddnspider
the spec 5 will be a real PITA to break in from the looks of it....and i guess its gonna be trial by fire with the pham kit.I drive pretty cautiously when it comes to bumps and such,and the DP is only like another 1/2" lower than the crossover pipe,guess well see.
Jer...did you have to get another belt when u got the alt bracket,cause it looks like im a good 2 inches short with of belt,any pics would be nice if im doing something wrong.
Jer...did you have to get another belt when u got the alt bracket,cause it looks like im a good 2 inches short with of belt,any pics would be nice if im doing something wrong.
Spec 5, huh? Stock master/slave?
#42
Originally Posted by frcefed98
Don't no no no me, if you don't know how to route a belt, then you really shouldn't be putting a turbo on the car J/K
Man I don't know what i've got going on, my car has be too far remove from stock for too long
Here is the belt # its a NAPA belt, hope it helps 25-060755 so its a 75 and 1/2 inches long or about there.
Post a pic up of how you are trying to route it if you can.
J
Man I don't know what i've got going on, my car has be too far remove from stock for too long
Here is the belt # its a NAPA belt, hope it helps 25-060755 so its a 75 and 1/2 inches long or about there.
Post a pic up of how you are trying to route it if you can.
J
bb....i replaced the master with an 02 or whatever it is,how's u like my attempt at the grill thing???
#44
you know im just kidding with you,you've been probably the biggest help since day 1 in sorting some of this turbo stuff out and i appreciate it.Anytime ur in FL,drop me a line.post up a pic of the routing as well as your hot and cold side piping if you would
#45
TECH Junkie
iTrader: (9)
Join Date: Apr 2005
Location: Miami, FL
Posts: 3,472
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ddnspider
Hey BITCH!ill start making fun of your dyno run its all good ill take a pic when i got to the shop tomorrow,but the belt is definitely short how its ran now anyways.
bb....i replaced the master with an 02 or whatever it is,how's u like my attempt at the grill thing???
bb....i replaced the master with an 02 or whatever it is,how's u like my attempt at the grill thing???
#60
I told you Jer that the stock belt was SHORT!....MR....."If you cant run a belt you shouldnt put a turbo on your car!!" Do you think i have modeling hands?
ABeasst.....replacing synchros and slider assemblies and the 3/4 shift fork
Mr....Mike.....STFU! If my F'in FMIC wasnt so damn big it woulda worked.
ABeasst.....replacing synchros and slider assemblies and the 3/4 shift fork
Mr....Mike.....STFU! If my F'in FMIC wasnt so damn big it woulda worked.