Started my build.
Thread Starter
9 Second Club
iTrader: (17)
Joined: Nov 2002
Posts: 4,997
Likes: 0
From: New Braunfels ,Tx
Started my build. Well I finally got my motor. Took a long time to get it due to the shop I used is in high demand. But it was well worth it. These pics I took are from the other day. I now have the heads on it and the oil pan etc done. Ill try today to get the other pics off the camera. But it broke that night and I have to send it off to HP to be repaired. 
Block is a 04 LS6,ross pistons,speed pro hell fire rings,eagle rods,arp on the mains and stock crank etc. Should have the blower and everything mounted up this coming sunday. Heres some pics. The head studs are wrong and I have sold them and put the right ones on.
Cooper Coat
Block is a 04 LS6,ross pistons,speed pro hell fire rings,eagle rods,arp on the mains and stock crank etc. Should have the blower and everything mounted up this coming sunday. Heres some pics. The head studs are wrong and I have sold them and put the right ones on.Cooper Coat
Thread Starter
9 Second Club
iTrader: (17)
Joined: Nov 2002
Posts: 4,997
Likes: 0
From: New Braunfels ,Tx
I hope so Jeff. I called RMCR for some advice and the 2.85 pulley and there upgraded tensioner. Next motnh he is coming out with a cog setup So I might setup to that once it is done.
Forged 347
Stock crank
Hell fire rings
ARP on the mains
TSP ported oil pump
Dura bond Coated High Performance LS1 Cam Bearing Set
Federal Mogul LS1 Engine Bearings
ARP head studs
GM MLS head gaskets cooper coated
6.0L 317 heads 71.2 CC
Ross pistons
eagle rods with ARP bolts
Cams specs. Inspector12 knows those
I paid under 2k
So I might setup to that once it is done. Forged 347
Stock crank
Hell fire rings
ARP on the mains
TSP ported oil pump
Dura bond Coated High Performance LS1 Cam Bearing Set
Federal Mogul LS1 Engine Bearings
ARP head studs
GM MLS head gaskets cooper coated
6.0L 317 heads 71.2 CC
Ross pistons
eagle rods with ARP bolts
Cams specs. Inspector12 knows those
I paid under 2k
Thread Starter
9 Second Club
iTrader: (17)
Joined: Nov 2002
Posts: 4,997
Likes: 0
From: New Braunfels ,Tx
Originally Posted by 98turbls1
Is that the price for everyone and what dish are on the pistons?? You can pm me any info if you don't want to put it on here but I'm really interested...Thanks
So I got the pistons and rods used for a good price. Less than 1k on them. But I had them checked. This is the reason I had to go with a 6.0l heads. And got them cleaned up a bit. Bought them from A_DEE_O and they flowed 290 @ .600 So I was happy with that.Piston specs from Ross. But There like -2cc to me.
PART # BORE STROKE ROD LENGTH C.R. C.H. NET CC PIN
99839 3.905 3.622 6.125 10.700 1.299 -4.000 0.927
Kyle thats would be great. Ill be happy with a 10 sec pass.
Man I really want a turbo kit next year. 
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Thread Starter
9 Second Club
iTrader: (17)
Joined: Nov 2002
Posts: 4,997
Likes: 0
From: New Braunfels ,Tx
Originally Posted by Pro Stock John
T-Trim with a 2.85 pulley should be fun, that is the pulley I have been running with the YSi-Trim.
I was just a bad time frame = Wife had our Daughter 
Yes I cant wait. Next week I have 5 days off striaght. I should be able to get it all done 
Im also glad I called RMCR. They actually machine the pulleys so they dont rub on there bracket. 
Thread Starter
9 Second Club
iTrader: (17)
Joined: Nov 2002
Posts: 4,997
Likes: 0
From: New Braunfels ,Tx
Well since the 12th I have worked non stop and no time for the car. Today I should have pics of the drivetrain back in her. Hopefully my buddie remembers to bring his camera. Mine is still broke and haven got the replacement yet. Woo Hoo cant wait.
Thread Starter
9 Second Club
iTrader: (17)
Joined: Nov 2002
Posts: 4,997
Likes: 0
From: New Braunfels ,Tx
Progress Lost my pics of us building the motor. But here are the recent pics. Ill have it done soon 
Have a good amount of work to do but it will be well worth it. The undercarriage needs to be cleaned. And I have some sanding and painting to do but all in all Im happy. Not bad for 4 days of work pretty much with my buddie Danny in the day time and Matt at night when they can. All thats really left is the nasty performance fuel system,vortech aftercooler,batt relocation, and alot of other lose ends. But it will get there. Im a happy camper
Have a good amount of work to do but it will be well worth it. The undercarriage needs to be cleaned. And I have some sanding and painting to do but all in all Im happy. Not bad for 4 days of work pretty much with my buddie Danny in the day time and Matt at night when they can. All thats really left is the nasty performance fuel system,vortech aftercooler,batt relocation, and alot of other lose ends. But it will get there. Im a happy camper Last edited by JMBLOWNWS6; Mar 24, 2006 at 05:52 AM.
Originally Posted by JMBLOWNWS6
Ill keep you both in the loop. Oldblue Ill let you know how it works. Then give you my contact!
