BOSS APPROVED!
whos running stock heads?
Originally Posted by Exotic Performance Plus
We made 660 rwhp with stock heads on an 6.0L iron block the other day at 15 psi of boost, on my Mustang Chassis Dyno. Bob
what cam, intake and exhaust?
did he have a 4'' elbow coming off the D1?
nice results...
mine will be a 408.
im going to be hogging out the exhaust side on mine with a huge duration split... 224/236 .581/.602 (something like that)
ill be using a single plane gmpp intake with sheet metal elbow and 90mm TB..
i'll also have the 4'' elbow on my D1 with NO sharp turns
i'll be interested to see how it turns out
mine will be a 408.
im going to be hogging out the exhaust side on mine with a huge duration split... 224/236 .581/.602 (something like that)
ill be using a single plane gmpp intake with sheet metal elbow and 90mm TB..
i'll also have the 4'' elbow on my D1 with NO sharp turns
i'll be interested to see how it turns out
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Originally Posted by Tiago
I made 700 rwhp on stock heads and cam, I ran into a limit of octane using 93. with race gas it would have gone alot further. Now going to new setup 
thats very comforting... i'd like to hit 700 at the back wheels...