t70 turbo max power
08-11-2006, 10:35 AM
#42
Originally Posted by PurEvl
rear mount, and yes definetly maxxed out, and to be honest i turned it down to 650ish because it was generating too much heat and i kept popping head gaskets.
Hey mike, what kind of boost were you pushing to pop them gaskets....so I know to keep it below that with this T 70 I have on the car now.
J
08-11-2006, 10:48 AM
#43
LS1TECH Sponsor
iTrader: (2)
Join Date: Aug 2002
Location: Huntsville, AL
Posts: 2,725
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by chuntington101
Dr turbo, for a rear mount setup, could you use say a t70 hot side with the cold side fgrom the newer T76??? could be a nice way of eliminating lag whilst still making good power!
thanks Chirs.
thanks Chirs.
.Jose
08-11-2006, 03:20 PM
#44
TECH Senior Member
iTrader: (2)
Join Date: Mar 2002
Location: South of Heaven
Posts: 5,469
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by frcefed98
Hey mike, what kind of boost were you pushing to pop them gaskets....so I know to keep it below that with this T 70 I have on the car now.
J
J
Lucky bastages, when need to buy ours
08-12-2006, 03:18 PM
#53
9 Second Club
iTrader: (2)
Join Date: Jun 2005
Location: Reston, VA
Posts: 2,034
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Boostaholic
About 650hp at the flywheel is about what they will make. Plenty for the stock bottom end.
I run 9psi on 91 octane, but im sure I could run more.
I run 9psi on 91 octane, but im sure I could run more.
Originally Posted by NA$TY-TA
There is no way that turbo will do 850 horsepower with our cubes........ 
Originally Posted by PurEvl
i hit just over 700rwhp with a t70...so ummm ya...anywho
I love LS1 Tech... you let a thread run and guys with lots of experience post up, and when you look at the medium of what everyone posts... you can bet the its fact!Personally I am with PurEvl... I have a T67 and did 607RWHP @ 11.5 lbs on my stock block... could have done more if my rings woulda held the boost. So I think a 70 on a forged block could see 700+ no problemo
08-12-2006, 03:55 PM
#55
TECH Junkie
iTrader: (9)
Join Date: Apr 2005
Location: Miami, FL
Posts: 3,472
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by longrange4u
I love LS1 Tech... you let a thread run and guys with lots of experience post up, and when you look at the medium of what everyone posts... you can bet the its fact!Personally I am with PurEvl... I have a T67 and did 607RWHP @ 11.5 lbs on my stock block... could have done more if my rings woulda held the boost. So I think a 70 on a forged block could see 700+ no problemo
08-12-2006, 04:45 PM
#57
TECH Junkie
iTrader: (9)
Join Date: Apr 2005
Location: Miami, FL
Posts: 3,472
Likes: 0
Received 0 Likes
on
0 Posts
I'm driving up to Revxtreme on the Saturday of Labor Day weekend. I could pick up the LS6 cam to bring back right that weekend. Then, for the MPT-70 and .96 housing, I could probably have it shipped to me from Revxtreme, if I ask them, a couple of days/weeks later as they get through tearing down my stock block. Is that good time for you?
08-14-2006, 11:04 AM
#58
Originally Posted by MiaSSmaro98
who makes them?wats the price on a t76 with like an .96 rear?
