t70 turbo max power
#1
Banned
Thread Starter
iTrader: (27)
Join Date: Jan 2006
Posts: 1,205
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
what s the max power of a master power T4 Super T-70 in a rear mount? i have a stock short block 346 ls1 with forged pistons going in, automatic 02 ss. i would like to run 10-12 lbs of boost. what do you guys think. thanks
A/R Specs:
.70A/R High Flow Compressor Housing with 4"inch Inlet!!!!
.68A/R and .96A/R Turbine Housing T4 P trim turbine wheel
A/R Specs:
.70A/R High Flow Compressor Housing with 4"inch Inlet!!!!
.68A/R and .96A/R Turbine Housing T4 P trim turbine wheel
#5
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by 67Firebird455
I'm using that turbo, and the compressor map shows 84lbs, which is approximately 850 horsepower.
Trending Topics
#10
12 Second Club
iTrader: (27)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by Boostaholic
About 650hp at the flywheel is about what they will make. Plenty for the stock bottom end.
I run 9psi on 91 octane, but im sure I could run more.
I run 9psi on 91 octane, but im sure I could run more.
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
#11
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Problem is size. The bigger 76 and 72 and 74 are all very large in size. Jose does have a new compact series of 70-76mm units though, so give us a call here at forcedinductions.com.
#13
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
You might be suprised on the price of the compact units he has, plus they do have a real full 1 year warranty and no questions asked. I will say though e-mail him cause the phone is acting funny and we have had problems for the past few days receiving calls.
#15
TECH Senior Member
iTrader: (16)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by DrTurbo
Problem is size. The bigger 76 and 72 and 74 are all very large in size. Jose does have a new compact series of 70-76mm units though, so give us a call here at forcedinductions.com.
Why not just post up specs , info and price? It tis a tech board in all and you are sponsors....and the info will help those of us looking for better turbos right now.
![Bang Head](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_banghead.gif)
#17
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by frcefed98
Why not just post up specs , info and price? It tis a tech board in all and you are sponsors....and the info will help those of us looking for better turbos right now.
![Bang Head](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_banghead.gif)
![Bang Head](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_banghead.gif)
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
![Bang Head](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_banghead.gif)
#19
TECH Senior Member
iTrader: (16)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Damn it I always get you and Jose mixed up
Sorry bout that![Embarassed](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_emb.gif)
But for under 1K and will support that kind of power...awesome. I'm not looking to break 1k but I'm in the market for a nice turbo for that amount of $$.
Right now i'm messing around with a T70 that is only temporary until I get a better unit.
Do you know if the turbo(s) in question are the/near the physical size of the T70-T76 turbo's?
I don't want to run a gigantor GT42 sized turbo again
![Bang Head](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_banghead.gif)
![Embarassed](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_emb.gif)
But for under 1K and will support that kind of power...awesome. I'm not looking to break 1k but I'm in the market for a nice turbo for that amount of $$.
Right now i'm messing around with a T70 that is only temporary until I get a better unit.
Do you know if the turbo(s) in question are the/near the physical size of the T70-T76 turbo's?
I don't want to run a gigantor GT42 sized turbo again
![Icon Lol](https://ls1tech.com/forums/images/smilies2/icon_lol.gif)
#20
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
They are a unit made by Jose and one of the T-netics eng's. We have been using and testing them for about 2 weeks now. Work awesome in small setups and have supported 1000hp crank with the newer turbine wheel fitted in.