More pictures of the new setup!!
02-05-2007, 03:39 PM
#101
Yeah someone put DJ's face on one of those smiley's and it will be self explanitory lol! I will have the new K-member by tommorrow and so it won't be long I decided to quit fighting it and change it so that it may cure a lot if not all of my fitment issues. I already have everything else ready to drag DJ's *** LOL!
02-12-2007, 05:51 AM
#106
Well I did get everything done. dropped the motor out changed the K-member and a few other things. Had to cut and reweld a few of the charge pipes and do a lot of tweaking to get it to fit like it does which is very good considering he fabbed it off of his car and they are all just a little different etc... I tried to crank but she didn't start so I have to do a little trouble shooting today after work as I worked hard and steady all weekend to get her 90% complete so I am not too worried right now as it could be several things I just tried a few times and said goodnight as it was 12:30 and I had to get up this morrning at 3:45 for work. I will get some more pictures for you guys as it looks pretty good if I do say so myself.
Jeff
Jeff
02-12-2007, 08:02 AM
#107
9 Second Club
iTrader: (17)
Join Date: Nov 2002
Location: New Braunfels ,Tx
Posts: 4,997
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Inspector12
Well I did get everything done. dropped the motor out changed the K-member and a few other things. Had to cut and reweld a few of the charge pipes and do a lot of tweaking to get it to fit like it does which is very good considering he fabbed it off of his car and they are all just a little different etc... I tried to crank but she didn't start so I have to do a little trouble shooting today after work as I worked hard and steady all weekend to get her 90% complete so I am not too worried right now as it could be several things I just tried a few times and said goodnight as it was 12:30 and I had to get up this morrning at 3:45 for work. I will get some more pictures for you guys as it looks pretty good if I do say so myself.
Jeff
Jeff
Goodluck bro.
02-12-2007, 08:49 AM
#108
Originally Posted by JMBLOWNWS6
Dammit cockblocked! Hey to let you know if you bought a Katech harness for the LS2 then wires have been crossed on the crank pickup on them. Out of 4 I have done 3 of them were wrong and caused all three cars not to start. Just a FYI if you used that. Goodluck bro.
Goodluck bro.Jeff
02-12-2007, 10:01 AM
#109
9 Second Club
iTrader: (17)
Join Date: Nov 2002
Location: New Braunfels ,Tx
Posts: 4,997
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Inspector12
No harness I swapped the outer two wires around and plugged it in. The only other plug I messed with was the crank sensor and that was to tap in the factory harness for the tach signal the rest is the BS3's harness with no spices. So I am going to make some phone calls and see what I need to check etc... Thanks for the help bro.
Jeff
Jeff
Jeff I have some hook ups with BS3. Let me know if you need any help bro!
I really want to hear this car!
02-13-2007, 06:07 AM
#112
Still have no crank signal tried a different crank sensor although the one I had was new stillnothing check the conections and the wires are making connection from computer to the plug. I am getting a little frustrated. Any ideas?
Jeff
Jeff
02-13-2007, 06:57 AM
#113
9 Second Club
iTrader: (17)
Join Date: Nov 2002
Location: New Braunfels ,Tx
Posts: 4,997
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Inspector12
Still have no crank signal tried a different crank sensor although the one I had was new stillnothing check the conections and the wires are making connection from computer to the plug. I am getting a little frustrated. Any ideas?
Jeff
Jeff
02-13-2007, 07:49 AM
#114
Originally Posted by Inspector12
Still have no crank signal tried a different crank sensor although the one I had was new stillnothing check the conections and the wires are making connection from computer to the plug. I am getting a little frustrated. Any ideas?
Jeff
Jeff
Good luck Jeff, I know if anyone can get it figured out it is you!!
02-15-2007, 10:59 AM
#115
It's alive finally found my problem and its running I am going to be finishing up a few things tonight and should be ready for some tunning action very soon. I will try to get a friend to post a video of it starting up for you guy to check it out.
Jeff
Jeff
Lies! 