My new car and New build
My new car and New build Well after parting out my old 98 Z28 Turbo car I could leave it alone. I had to get back into the game. I funded my own shop. I hope to get it lined out and become a Sponsor on here soon. I just wanted to let everyone know how I was comming along. Keep up the good work on your builds.
Here it is a few pics of the car in my Sig.
2000 Z28
370ci 8.5:1
Ported 6.0L heads
Speed Inc TU1 cam
LS6 intake and TB
EFI Live/RR for tunning in 100% Real Time
TH400 w T-brake
Yank Billet 3000k stall
Cheeta shifter
Moser 9 inch w/3.25 gears
Some UMI suspension stuff...
The Turbo Setup: (Similar to before but with some Changes)
6.0L manifolds
2.5" charge pipes
3" Down pipe
3" Intercooler pipes
31x12x4 Intercooler
Turbonetics TC76MPS
Turbo Smart BOV
Turbo Smart WG
Keep an eye out in the for sale forums. This setup will be for sale soon. I want to step up to a bigger T6 88mm turbo.
Here it is a few pics of the car in my Sig.
2000 Z28
370ci 8.5:1
Ported 6.0L heads
Speed Inc TU1 cam
LS6 intake and TB
EFI Live/RR for tunning in 100% Real Time
TH400 w T-brake
Yank Billet 3000k stall
Cheeta shifter
Moser 9 inch w/3.25 gears
Some UMI suspension stuff...
The Turbo Setup: (Similar to before but with some Changes)
6.0L manifolds
2.5" charge pipes
3" Down pipe
3" Intercooler pipes
31x12x4 Intercooler
Turbonetics TC76MPS
Turbo Smart BOV
Turbo Smart WG
Keep an eye out in the for sale forums. This setup will be for sale soon. I want to step up to a bigger T6 88mm turbo.
The downpipe runs exactly where a/c compressor would be, no a/c. Also are you not worried about the ceramic coating holding up? If thats what it is, can't tell for sure by the pics.
Its VHT 2000 degree spray can Header coating. Not ceramic. I use it then wrap the pipes on my car. I dont ever drive in the rain and it always stays in side overnight. Its worked well for me many times over.
Got Me SOM: I just listed that Turbo setup for sale. Since all of you guys are doing these big cube/huge turbo builds I am gonign to do a T6 88mm setup just so I can keep up. The car has the right part for big HP, so I am going to push it.
Got Me SOM: I just listed that Turbo setup for sale. Since all of you guys are doing these big cube/huge turbo builds I am gonign to do a T6 88mm setup just so I can keep up. The car has the right part for big HP, so I am going to push it.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Appreciate it Jer. Alot of my old Ford customers urged me to do this. I have put alot of thought into the setup and the routing of the pipe s along with the components. Once everything is lined out I want to get sponsored here on Tech.
Get Me SOM: This is my street car . I havent gotten around to using the software yet. i used it on a friends car. it is awsesome. I swithed from HPTuners to the EFI Live/RR software the day I used my buddies.
Get Me SOM: This is my street car
. I havent gotten around to using the software yet. i used it on a friends car. it is awsesome. I swithed from HPTuners to the EFI Live/RR software the day I used my buddies. 
No longer working out of the house I see... 
Looks like you have a little more room now....
Your old 1LE is coming along well getting ready for a motor
Can't wait to see your stuff take off.... What did you do with those ZO6 wheels I sold you.... Again hope the best for you....
Looks like you have a little more room now....Your old 1LE is coming along well getting ready for a motor
Can't wait to see your stuff take off.... What did you do with those ZO6 wheels I sold you.... Again hope the best for you.... very cool . I want a car that's streetable to play enter the local heads up events here and to play on sat nights.
i ned to buy efi live software for my ride. think its cool to do instant changes with the RR.
i ned to buy efi live software for my ride. think its cool to do instant changes with the RR.
Yeah I moved into a small 1200sqft shop. The Z06 wheels made it to a buddies car. They stayed local. I am glad to hear the 1LE is coming along nicely.
Get Me SOM: I cant wait to tune the car with the RR. It will amek all the difference in the world. EFI Live is getting ready to release Closed Loop auto tune with WB feed Back also. That will make tunning that much easier.
I appreciate all the props guys. I hope to have everything lined out and ready to go with in a month or so to luanch here on Tech. I am sure you guys will like the setup and pricing. Just got to get everything finished up.
Get Me SOM: I cant wait to tune the car with the RR. It will amek all the difference in the world. EFI Live is getting ready to release Closed Loop auto tune with WB feed Back also. That will make tunning that much easier.
I appreciate all the props guys. I hope to have everything lined out and ready to go with in a month or so to luanch here on Tech. I am sure you guys will like the setup and pricing. Just got to get everything finished up.
Good luck with everything, looks pretty nice. Your old car was very nicely done as well. I may even try one of your kits with the 88 down the road, save me a lot of time. I dont mind welding but I hate making the pipes, makes a mess in a small garage 
How long before you get this one running, BG is open early this year
How long before you get this one running, BG is open early this year
Depends on how quick the mock up kit in the pics sells. I have nearly everything but a drive shaft to finish the car. If it doesnt sell soon I will use it. I am almost 90% sure a T4 PT88 will fit as the kit is with no mods other than a bigger down pipe. I may go that route too.
Last edited by wickedred; Jan 20, 2007 at 12:15 AM.
Been working my butt off. Got my shifter and console finished. I started taking the factory rear out to make room for the 9 inch. Should have it wrapped 90% up by tomarrow night along with the NastyN8 fuel system. I still have to fab up the exhaust from the DP back. Gonna be a simple 3 inch run to a Bullet muffler near the axle. I still have to measure and buy a drive shaft too. I have alot of work ahead of me.
I am giving the mock up kit sunday to sell or it is going on the car. I want to get it running soon. I have alot of tunning to do before the track opens which is real soon.
I am giving the mock up kit sunday to sell or it is going on the car. I want to get it running soon. I have alot of tunning to do before the track opens which is real soon.