Hey guys i wanna cut my radiator shroud to move forward both my a/c condenser and radiator .i figure with thin spal fans mounted on the engine bay plus moving the radiator forward ,i should be able to fit a 76mm with no problems and avoid the usual high tempertures.show me some pics

 

i cut the plastic infront of the a/c condensor and cut notches in the frame rails that the a/c hit so it could go farther back into the frame, gave me like an extra inch

 

Here's my set up. I use a 3000 spal fan

David

 

navyss thats a bit to hardcore for me ,blkss im going to cut the tap were the a/c condenser holds on to the radiator for some clearance and then cut to move everything front.

 

i really like this guys setup. Maybe he'll chime in about which fans he uses.

 

I know there are more, come on guys

 

WELL IT LOOKS LIKE THE CONDENSER IS STILL THERE, SO THAT'S EXACTY WHAT I WANNA DO

 

this make a little more room

 

looks good guys

 

hamrhead....
which radiator is that? if you have a link to the exact one would be great

Thanks
steve

 

I plan to do mine like Hamrhead did his with a twin pusher and single puller fan setup. I will take pics of the process to give eveyone an idea of how easy it is to do.

 

It was a custom radiator ordered through Speed inc for a new setup.

 

I see one puller and one pusher, where are you getting twin pushers?

 

I am gonna cut my core support like he did. I am going to use my Spal twin pusher setup and then add a single puller on my car. Sorry about the confusion.

 

Here is what I got done on the radiator support so far.

 

OFI sells a radiator that fits IN the core support.

 

really now, is there a link to this radiator?

 

No link on OFI's exsiting site. Maybe it will be on his new site. I ordered a BeCool, but I ordered the wrong one. Yeah me and Ebay. The one I ordered has the outlet on the driver side bottom and the inlet on the passenger side upper. I am going to wait till it arrives to see if I can make it work. If not hen I will try something different.

 

no link on his site...its the radiator he sells with his kit...i am buying one for his hot parts...lemme call real quick and make sure he'd sell it to everyone and for what price

 

just called...he only sells them with his kit to make it work...too much hassle to just make/sell outright...sorry for the misinformation