Maggie owners - what other mods?
Maggie owners - what other mods? Who else has a MagnaCharger and what are you running for boost? What other mods have you done to get more out of your car? I've got the Kooks 17/8", catted 3" X pipe, Z06 Ti muflers, Blackwing, 918 springs, chrommoly PR's and a 3.3" pulley. Very soon I'm going to a 2.9" pulley while getting a custom grind cam installed by Slowhawk with a new tune.
Has anyone come across the limits a Maggie has? Their tech service told me they can run 10 PSI w/o issue and some have run even higher. I sent my S/C out to have it refurbed since it has 41k on it and the bypass valve roller bearings were worn. Should be like new again.
Has anyone come across the limits a Maggie has? Their tech service told me they can run 10 PSI w/o issue and some have run even higher. I sent my S/C out to have it refurbed since it has 41k on it and the bypass valve roller bearings were worn. Should be like new again.
Originally Posted by Slowhawk
We've run 16lbs on a 4.8l truck but the inlet temp was insanely hot after a run.
Pulley,Cam,fuel then clutch--done.
Pulley,Cam,fuel then clutch--done.
No plans to go North of 9-10 for me. I should be getting the Maggie back by the end of next week so I hope to get the car down to your place the week after. How's your schedule looking Don?
Originally Posted by 02SCVette
16 lbs! No plans to go North of 9-10 for me. I should be getting the Maggie back by the end of next week so I hope to get the car down to your place the week after. How's your schedule looking Don?
No plans to go North of 9-10 for me. I should be getting the Maggie back by the end of next week so I hope to get the car down to your place the week after. How's your schedule looking Don?Looks like 100hr weeks coming soon again
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Originally Posted by Slowhawk
You do know that methenol eat's at the rotor's in Magnachargers,right?
On The Tree
Joined: Aug 2005
Posts: 152
Likes: 0
From: St. Petersburg, Florida
Originally Posted by Slowhawk
You do know that methenol eat's at the rotor's in Magnachargers,right?
Now throw water in the mix... all bets off. But the meth.. wont have any issue.
Julio
Originally Posted by Slowhawk
You don't want to know.I'm going to Florida at the end of the month on vaca. and everybody is spending there tax $$.Just today we booked 4 near future jobs. But of course I'll fit you in.Have all the parts here waiting.
Looks like 100hr weeks coming soon again
Looks like 100hr weeks coming soon again
No biggie, I'm fine waiting since the car will just be sitting until the roads clear up. I'll PM you when the car is ready and then you'll have a good 4-6 weeks to do it so I'm flexible.Sounds like you'll need the vacation too!
10 Second Club
Joined: Dec 2004
Posts: 405
Likes: 0
From: slocala
Originally Posted by Slowhawk
You do know that methenol eat's at the rotor's in Magnachargers,right?
I've read about it but never heard anything other than internet lore
