F Body intercooled twin turbo system - preliminary pricing $5495 inc free delvery
#1061
FormerVendor
Thread Starter
iTrader: (2)
Join Date: Sep 2005
Location: Australia
Posts: 1,968
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by calongo_SS
It sure looks like the BOV's will pre-maf to me. It should be as easy as plugging the hole behind the filter and the BOV's will be vented to atmosphere.
Peter
#1062
FormerVendor
Thread Starter
iTrader: (2)
Join Date: Sep 2005
Location: Australia
Posts: 1,968
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by JMBLOWNWS6
I was thinking I was going to cut and plug those and add a tial BOV right before the intake
Peter
#1063
FormerVendor
Thread Starter
iTrader: (2)
Join Date: Sep 2005
Location: Australia
Posts: 1,968
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by FLASH1970
this kit is going to be flippin' sweet. i hate to say it, but i wish it was the end of summer so i'd have my kit already.
Peter
#1064
9 Second Club
iTrader: (17)
Join Date: Nov 2002
Location: New Braunfels ,Tx
Posts: 4,997
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by peter@aps
Why? To what advanatge would that be?
Peter
Peter
#1065
FormerVendor
Thread Starter
iTrader: (2)
Join Date: Sep 2005
Location: Australia
Posts: 1,968
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by DanZ28
I may have missed it since I didn't read every post, but does this kit fit with a TH400 or 4L80 trans?? I might be very interested if it does. Looks to be a very sweet kit!
Dan
Dan
Peter
#1066
FormerVendor
Thread Starter
iTrader: (2)
Join Date: Sep 2005
Location: Australia
Posts: 1,968
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by onfire
BOV shouldn't be opening on da track......hammer down....
Peter
#1069
FormerVendor
Thread Starter
iTrader: (2)
Join Date: Sep 2005
Location: Australia
Posts: 1,968
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by fil131
For those of you that have ordered, is it required that you have a fax number?
Peter please let me know either here or PM or email me at FIL131@comcast.net
Thanks
Filbert
Peter please let me know either here or PM or email me at FIL131@comcast.net
Thanks
Filbert
Peter
#1070
FormerVendor
Thread Starter
iTrader: (2)
Join Date: Sep 2005
Location: Australia
Posts: 1,968
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by bigblueturtle
I don’t know about you guys, but every day the anticipation builds. I can’t wait for my kit to get here… and then I think about how much work there will be to do… that calms me down a little.
Originally Posted by bigblueturtle
Peter,
When do you need the rest of the payment? I have no problem keeping the money in my account earning interest, but I don’t want to miss the due date either.
When do you need the rest of the payment? I have no problem keeping the money in my account earning interest, but I don’t want to miss the due date either.
Thanks,
Peter
#1072
FormerVendor
Thread Starter
iTrader: (2)
Join Date: Sep 2005
Location: Australia
Posts: 1,968
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by JMBLOWNWS6
Can I just get them from you now! It would be one less part I would have to outsource PLEASE!
Thanks,
Peter
#1073
9 Second Club
iTrader: (17)
Join Date: Nov 2002
Location: New Braunfels ,Tx
Posts: 4,997
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by peter@aps
I'd have to check into the time frame as to availablity of APS high volume billet blow off valves.................I'll get back you soon.
Thanks,
Peter
Thanks,
Peter
#1075
9 Second Club
iTrader: (17)
Join Date: Nov 2002
Location: New Braunfels ,Tx
Posts: 4,997
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Inspector12
Are you getting excited or what JM? It's almost time for you to join the TT club.
#1076
FormerVendor
Thread Starter
iTrader: (2)
Join Date: Sep 2005
Location: Australia
Posts: 1,968
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by fil131
So pricewise for a stocker we will need at least the following (feel free to add to this if you need to guys);
1. Fuel pump system up to $1300
2. fuel rails $150+
3. 60lb injectors: $250 low to $550 high
4. valve springs around $200+
5. turbo back exhaust $700+
6. BMR K-member $500
So when all is said and done just for a stocker to utilize this system we are looking at around $8200 low and $9500 or more.
1. Fuel pump system up to $1300
2. fuel rails $150+
3. 60lb injectors: $250 low to $550 high
4. valve springs around $200+
5. turbo back exhaust $700+
6. BMR K-member $500
So when all is said and done just for a stocker to utilize this system we are looking at around $8200 low and $9500 or more.
1. Fuel pump system up to $1300
fuel system to support 540 rwhp should not cost more than $750.
2. fuel rails $150+
Not required unless you're planning on very high power levels.
3. 60lb injectors: $250 low to $550 high
60 lb Injectors and Walbro 342 high volume pump covered in point 1 - should not cost more than $750 for the pump and injectors,
4. valve springs around $200+
Definitely worth doing on any LS1 FI engine.
5. turbo back exhaust $700+
You can plumb back into the stock exhaust or build a twin 3 inch exhaust system which is ideal for high powered twin turbo engines.
6. BMR K-member $500
Mandatory part for the APS twin turbo system.
#1078
FormerVendor
Thread Starter
iTrader: (2)
Join Date: Sep 2005
Location: Australia
Posts: 1,968
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SPRAYED 01
Of course you need all that stuff,every one knows that. This is just the turbo kit not supporting mods. This is an expensive sport.
Peter
#1079
TT-TECH Veteran
iTrader: (29)
Originally Posted by JMBLOWNWS6
LOL Hell yea man. My car has been down 45 days and I allready miss it again! You working tonight Jeff?
Jeff
#1080
9 Second Club
iTrader: (17)
Join Date: Nov 2002
Location: New Braunfels ,Tx
Posts: 4,997
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Inspector12
You know it. 3 months of nights and Loving it LOL! I just moved into the new house and new shop is looking good. Talk to you soon I'll give you a ring.
Jeff
Jeff