View Poll Results: Which Engine?
LS2
8
21.62%
L92
29
78.38%
Voters: 37. You may not vote on this poll
Ls2 or L92 for D1sc
04-02-2007, 09:23 PM
#21
Launching!
Thread Starter
Join Date: Jul 2005
Posts: 267
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Got Me SOM
good flowing heads will help without a doubt but aren't as critical in f/i applications.
when you start making more power in general, the weak links are going to surface. it also depends on how hard you are ragging on your car.
I ran on my stock trans with a shift kit and stock 10 bolt on my setup and they have lasted but I dont go racing my car every weeek. I do have fun with her when I drive it.
when you start making more power in general, the weak links are going to surface. it also depends on how hard you are ragging on your car.
I ran on my stock trans with a shift kit and stock 10 bolt on my setup and they have lasted but I dont go racing my car every weeek. I do have fun with her when I drive it.
. So now i have a S60 so thats one less thing to worry about breaking.. 
04-02-2007, 10:43 PM
#22
TECH Resident
Join Date: Jan 2007
Location: Texas
Posts: 751
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 98 Z28
Good luck with the upgrades. 
It will be interesting what it picks up with the fast intake. Some people say all you need is the ls6 intake so it will be interesting.. Let us know how it does with the new intake
It will be interesting what it picks up with the fast intake. Some people say all you need is the ls6 intake so it will be interesting.. Let us know how it does with the new intake
12-26-2007, 04:19 PM
#24
11 Second Club
iTrader: (1)
Join Date: Oct 2003
Location: Granbury Texas
Posts: 691
Likes: 0
Received 0 Likes
on
0 Posts
Just as in N/A, you want to decrease restriction from intake to exhaust. Case in point: I have LS6 intake/ported throttle body/ported MAF and make 657rwhp with 9.4psi. I am switching to FAST 90/90 with 85mm ZO6 MAF and hope to gain 15-20rwhp while I see small decrease in boost. I'll keep you posted once I get my car re-tuned and dynoed. This is the theory, I hope it works for me
I had the FAST 90 intake and throttlebody and was told to take it off it would not work and would not gain any more power. I hope I was misled after spending all that cash on the stuff and selling the intake for 1/2 and not even being able to sell the throttlebody. I have the LS6 stuff and a stock thottle body and made 700 rwhp with 12#.
12-26-2007, 04:43 PM
#25
TECH Resident
Join Date: Jan 2007
Location: Texas
Posts: 751
Likes: 0
Received 0 Likes
on
0 Posts
I had the FAST 90 intake and throttlebody and was told to take it off it would not work and would not gain any more power. I hope I was misled after spending all that cash on the stuff and selling the intake for 1/2 and not even being able to sell the throttlebody. I have the LS6 stuff and a stock thottle body and made 700 rwhp with 12#.
12-26-2007, 05:17 PM
#26
Launching!
Join Date: Apr 2007
Location: lynchburg va
Posts: 279
Likes: 0
Received 0 Likes
on
0 Posts
How are the L76 intakes doing with the L92 heads on boost? I know LS6 intakes are supposed to do great, but what about the L76? I was thinking about a LQ9 and LS6 intake setup for my 370. Now im wonderingabout the L92/L76 combo. Hummmmm. Would i be dub to get the LQ9/LS6 over the L92/L76? Im also on a D1SC build and trying to decide. Would the L92s be too much head for a 370 inch motor?
