STS Help
Also check the install manual and see if there is a product ID number or some sort of identification for the kit. That way you can call STS and see what all is in your kit.
Or you can take pics close up and post them. We can then maybe figure out what you bought. The BOV should be a TIAL is its from the kit. I would say in the future, DONT buy something unless you know what your getting. use some sense
Last edited by JAvenger007; Apr 29, 2007 at 10:01 AM.
Anyways, I wrote down some #'s off the stuff.
A-R . 81
CCE67
R-60
Tial Sport SN1205713
I have the SN# and the manufac. date, do you think I can call them and see exactally what I have?
My STS build: https://ls1tech.com/forums/forced-induction/631954-sts-install-pics-stuff.html

If it's the baseline kit, which it appears to be, in good condition, maybe $2k + shipping.
I got mine for under $3k it had the 67mm upgrade, BOV, 2 boost controllers, Meth Kit, shortened I-pipe, extra exhaust housing, huge **** mod, etc, etc.
Trending Topics
The Best V8 Stories One Small Block at Time
http://www.ststurbo.com/ls1_camaro
underneath the pic of the trans am is a link that says:
"Click Here to Download the Instruction Manual" it's a 51 page pdf. good luck
Why do all these post revert back to the size of my enormous ****?...it's getting riDICKulous
Why do all these post revert back to the size of my enormous ****?...it's getting riDICKulous



^