??? about f1 procharger..
I believe you can boost as far down as the p1 or d1 if you choose to put that big of a pulley on. I believe the size is a 4.33. But why would you want to buy an F1 if you don't plan on going over 12 psi?
Originally Posted by marco427
I'm running 8 psi on an F1C until I 1.get used to 773 RWHP and 2.Install a meth system.
Car in avatar.Mods are headers ORY.Stock engine. I plan on going all forged later on but I can buy a F1 kit here
https://ls1tech.com/forums/lsx-parts-sale/711918-procharger-f1-kit-f-body.html
https://ls1tech.com/forums/lsx-parts-sale/711918-procharger-f1-kit-f-body.html
Do it... Just put the biggest pulley that you can and then if your motor still goes then it's meant to be with the forged engine... Just run little timing and lots of fuel to get you through... You may also look into some meth...
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
on a stock bottom end with no fuel system you'll be blowing her up very soon.
hey marko did u use all the money you stole from all the members on your hi flo production turbo kit to build that car?
hey marko did u use all the money you stole from all the members on your hi flo production turbo kit to build that car?
TECH Enthusiast
Joined: Jul 2003
Posts: 734
Likes: 7
From: Imperial Valley, CA
Originally Posted by marco427
I'm running a C5R 427 with LS7 heads. The car made almost 800 RWHP at the same 8 pounds of boost with a slightly leaner tune.
which cam? thats the hp im shooting for. as long as i get 700 at the wheels with 8lbs id be happy, that 800 with just 8lbs, i gotta get some tips.
Originally Posted by Exotic Performance Plus
We had a customer with an 04 GTO buy an F1A from us. He had a 5.75 blower pulley custom made for him as his bottom end is still stock. He ended up with 6.75 lbs of boost. Bob
What is the biggest pulley available from Procharger?
TECH Enthusiast
Joined: Jul 2003
Posts: 734
Likes: 7
From: Imperial Valley, CA
Originally Posted by Exotic Performance Plus
We had a customer with an 04 GTO buy an F1A from us. He had a 5.75 blower pulley custom made for him as his bottom end is still stock. He ended up with 6.75 lbs of boost. Bob
ill be ordering pretty soon.
