HUNTER02SS

iTrader: (24)

My whole system is vented to atmosphere. I put a big filter where my fillcap is and a small filter beside it on the valve cover.Seem's to be working fine.

52172

iTrader: (2)

Do you think we should vent like you before using restrictors on oil feed line? Do you think my factory PCV is the problem maybe? Thanks

HUNTER02SS

iTrader: (24)

I am not sure how your setup is.What work's for me might not work for you.But i know if you are building to much crankcase pressure by not having enough ventilation, then you can suck oil past your ring's and cause a smoke storm.If so that might make it seem like the turbo seal's are bad.I accidently plugged off my valvecover port's and it sucked oil into the turbo and it smoked real bad until i finally got it blowed out by driving down the road.

52172

iTrader: (2)

Thanks for your advice.

DrTurbo

iTrader: (3)

I think you spoke to Jose about this already. So goodluck...

52172

iTrader: (2)

I did thanks DrTurbo. We are gonna vent both sides and use an oil line restrictor no smaller than .050 and then as a last resort send in the TC76 for repair.

DrTurbo

iTrader: (3)

Did Jose end up getting you taken care of on your turbo?

52172

iTrader: (2)

He sure did we and going to hand deliver the turbo to them today. That will save me about two weeks shipping time. You guys ROCK!

DrTurbo

iTrader: (3)

Well glad to hear that. Jose called it in to let them know it was coming hand delivered....so you should be good to go. Good luck...

52172

iTrader: (2)

I will update this post and my Hi-Flo post when we get the turbo back. By any chance were you the one I spoke with on the phone the night before Jose called Turbonetics?

52172

iTrader: (2)

We ended up trying a .080 restrictor and then a .050 and the smoking did not get any better. It smokes like a James bond smoke screen car and seems to be getting worse. Turbo is not off car and was hand delivered to turbonetics. Hopefully they will get it back to us quick.

JZ 97 SS 1500

iTrader: (2)

No you spoke with Jason, he was at the shop after hours.

JZ 97 SS 1500

iTrader: (2)

Let me know if their is a hold up. I will call T-netics and get it moving.

Jose

52172

iTrader: (2)

Thanks Jose! I will do that if there is one for sure. Car will be completely finished after we fix this oiling issue. I'm ready to pick her up from the shop as soon as they get the turbo back. The cool thing about it Rob Barth the shop owner that has my car knows Brian and a lot of the guys over @ turbonetics. Hopefully there are no holdups.