I am looking a the TR blower cam with a 214 duration .601 lift intake. What do you guys feel about the lift on this cam. Is it too extreme? I know that comp cams XLI extreme cam has this lift on a 214, but I don't know if it is designed for a blower car. Just want to make sure that I make the right choice before I dive in. Thanks

 

I've run several .60x - .61x lift cams.

 

same here.... my new one will be the same.......

 

I am running .598" on intake and .608" oh exhaust

Keith

 

For sure I have no doubt that you can go .6xx lift, but my question is the .601 on a 214, and how steep of a ramp the lifter must go on that duration. It maybe perfectly ok but I just wanted to get everyones take. Thanks

 

We run a futral blower cam (.60X lift) cam succesfully with relatively low boost (12 psi)

 

well my lifts are just under .600 but my durations are greater so my ramp rates and stuff would be greater that TR's blower cam

 

My understanding is that your ramp is less because the duration is longer that make the lift upwards slower and not as steep.

 

Ran 250+ on both intake/exhaust at .050 with just under .700" lift. It was on the small side but that was great for street driving.