Gen-TT on a cam only car??
Gen-TT on a cam only car?? A buddy of mine bought a new Gen-TT twin turbo kit for his T/A, but come to find out we cant get it to fit with his turbo 400 tranny. I was wondering if anyone knew how this kit would be on a cam only car. The cam I am running is a 224/232 .567/.574 with a 114+2 LSA. If I got the kit, I would run somewhere around 7 pounds of boost with it. I know that the turbo's in this kit are somewhat overkill for a stock engine, but I was wondering what everyones opinion on the subject was. Input is appreciated. Thanks.
Zach
Zach
Originally Posted by 99Z28LS1
i'd do it if i had the money
Trending Topics
TECH Enthusiast
Joined: Jul 2005
Posts: 705
Likes: 0
From: kuwait
as far as i know that the min boost is 8PSI on these turbos .. and can you tell me why the TH400 wont fit because am ordering one from ls1 speed and it need two weeks to get hear so please pot some pic from where it dosent wont to fit....
thanks,
thanks,
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo We tried to bolt the kit up with the turbo 400 in there and it needs about an inch and a half to even clear the bellhousing of the tranny. I dont have any pics because the car is now getting a custom twin setup and the Gen-TT kit has been packed back up.
Originally Posted by firehawk123
as far as i know that the min boost is 8PSI on these turbos .. and can you tell me why the TH400 wont fit because am ordering one from ls1 speed and it need two weeks to get hear so please pot some pic from where it dosent wont to fit....
thanks,
thanks,
Hummm.. 8PSI. Maybe with a VERY safe and conservitave tune it will be alright. What yall think?
TECH Enthusiast
Joined: Jul 2005
Posts: 705
Likes: 0
From: kuwait
yes with 8psi and good tune you will be save and you will make good HP and TQ . but you sad the Gen-TT kit has been packed back up why ? ok even if you grind the bellhousing it will not fit i think it should
am having my th400 after two week's .
am having my th400 after two week's .
Originally Posted by firehawk123
yes with 8psi and good tune you will be save and you will make good HP and TQ . but you sad the Gen-TT kit has been packed back up why ? ok even if you grind the bellhousing it will not fit i think it should
am having my th400 after two week's .
am having my th400 after two week's .
He has it packed back up because he is going to sell the kit and have a custom kit made, and I was wanting to buy the kit from him. Guess that you will have to see when your TH400 gets there if it fits or not, sure hope it does for you, but not looking that way for him.
TECH Enthusiast
Joined: Jul 2005
Posts: 705
Likes: 0
From: kuwait
yes the time it will receved i will let you know guys what is going to happen with me .. and am really sorry about your firend that he is going to seal the kit if i were hem i will install it and give it tray and cut the billhousing am going to give street tuna a call and see what he is going to tell me about it .. maybe i will send the transmetion to hem and let hem to it for me if he would like.
Originally Posted by firehawk123
yes the time it will receved i will let you know guys what is going to happen with me .. and am really sorry about your firend that he is going to seal the kit if i were hem i will install it and give it tray and cut the billhousing am going to give street tuna a call and see what he is going to tell me about it .. maybe i will send the transmetion to hem and let hem to it for me if he would like.
Yeah man, keep us informed on how it goes.
TECH Enthusiast
Joined: Jul 2005
Posts: 705
Likes: 0
From: kuwait
yes i will , i just got my BS3 today and its going to insall it and tune the car and we are planing right now to take it to the track this week its going to open and see what the GTT its going to make in the track , so we are going to posh it to 20PSI and maybe little more so i can see 1000HP+ and after that when the TH400 gets hear am going to install it and i will take it again to the track and see what its going to make am looking for the 9's high 8's 