More News at KYTP.
#23
Banned
Thread Starter
iTrader: (120)
Join Date: Feb 2002
Posts: 3,199
Likes: 0
Received 0 Likes
on
0 Posts
It is easier to build a 8 second race car than it is to build a 9 second street car with all the creature comforts. Its cheaper too.
#25
10 Second Club
iTrader: (5)
Join Date: Nov 2001
Location: Cali/Bay Area
Posts: 3,412
Likes: 0
Received 0 Likes
on
0 Posts
Not to much to ask for just difficult to do and keep all the accesories. The DP is probably one of the harder things to do above the K-member and either your Alt or A/C is in the way, if not the DP then the manifolds.
Dam expensive to do, I can attest for that, I'm approacing 20K now and not quite done yet . That doesn't even include the TH400 I already had, 12 bolt, DS and other goodies.
Dam expensive to do, I can attest for that, I'm approacing 20K now and not quite done yet . That doesn't even include the TH400 I already had, 12 bolt, DS and other goodies.
#26
Banned
Thread Starter
iTrader: (120)
Join Date: Feb 2002
Posts: 3,199
Likes: 0
Received 0 Likes
on
0 Posts
Update.
I bought a 99 Z28 Roller. Hard Top original 6 spd car. Need a little body work, bu7t I got it cheap.
I got a Stock LS1 long block with the roller. Also cheap.
As of right now the plan is to finish the mock up of the redesigned hot parts I am going to offer. The it is one to building the car around the inhouse and customer builds.
The car is gonna recive the following:
-Stock Long Block
-Solid trans of some sort.
-Decent fuel system
-And of course my turbo setup.
I am gonna see what the stock long block and my turbo setup will do. Pretty much dyno and run it till it blows. I am not in a huge hurry on the car as I have enough going on at the shop to keep me busy. The hot parts should be available first of the year 08. I am waitng on more steel to arrive right now.
I bought a 99 Z28 Roller. Hard Top original 6 spd car. Need a little body work, bu7t I got it cheap.
I got a Stock LS1 long block with the roller. Also cheap.
As of right now the plan is to finish the mock up of the redesigned hot parts I am going to offer. The it is one to building the car around the inhouse and customer builds.
The car is gonna recive the following:
-Stock Long Block
-Solid trans of some sort.
-Decent fuel system
-And of course my turbo setup.
I am gonna see what the stock long block and my turbo setup will do. Pretty much dyno and run it till it blows. I am not in a huge hurry on the car as I have enough going on at the shop to keep me busy. The hot parts should be available first of the year 08. I am waitng on more steel to arrive right now.
#28
Banned
Thread Starter
iTrader: (120)
Join Date: Feb 2002
Posts: 3,199
Likes: 0
Received 0 Likes
on
0 Posts
I bought a set of -26cc dish pistons from a member here. I may wait around and tear into the Long Block and buy a set of 6.125 rods and put the short block together. Should yeild around 8.4: with 64cc heads. I am looking to make this shop car more of a budget turbo street car (as much as it can be), where as my 2000 Z28 was set up for the track. I proved with a built engine the setup would support well over 750rwhp and rwtq with the TC76MPS. I love that turbo. I am setting the new hot parts up to fit anywhere from the TC series up to the ST and SX series of turbos.
I plan to sell hot parts setup, which will consist of the Charge pipe with a T4 flange, Narrow Band 02 bungs, 38mm WG flange, and a 3 inch down pipe with a 4 inch DP option. I am looking to keep the price around $1200 + shipping.
I am also looking into doing some parts sales in the near future. I have a line on QA1 products. I am looking to do a GP on those soon.
I plan to sell hot parts setup, which will consist of the Charge pipe with a T4 flange, Narrow Band 02 bungs, 38mm WG flange, and a 3 inch down pipe with a 4 inch DP option. I am looking to keep the price around $1200 + shipping.
I am also looking into doing some parts sales in the near future. I have a line on QA1 products. I am looking to do a GP on those soon.
#30
Banned
Thread Starter
iTrader: (120)
Join Date: Feb 2002
Posts: 3,199
Likes: 0
Received 0 Likes
on
0 Posts
I am still waiting on the C6 manifolds for the A/C setup. Keeping the A/C wont be a problem if you are willing to go to the new BMR Turbo k-member. There is plent of room for big DP's and keeping the A/C.
#31
Staging Lane
Join Date: Dec 2007
Location: River Falls,WI
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
im definately interested in your kits josh, i just have one question. on your site it says the kit with the TC76 is 4200 shipped, with the turbo switched to say a SX80, how much more would you estimate it to be?
#36
Banned
Thread Starter
iTrader: (120)
Join Date: Feb 2002
Posts: 3,199
Likes: 0
Received 0 Likes
on
0 Posts
The TC76MPS setup on my 370 made over 750rwhp and went 9.80's in the 1/4 at over 141mph. Went 6.09 @ 114 in the 1/8. All on 325 DRs and 15 lbs of boost.
The sky is the limit.
#39