Big single turbo + 481ci
#41
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
can you post compressor housing dimensions on this? I currently have fitted a gt47 but its tight. Based on the dimensions listed on garrett's site, the gt55 looks to be roughly the same size as a 47 externally...
waiting on the posting of some 08 drag radial race rules...but a 98 would be pretty sweet![Nod](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_nod.gif)
waiting on the posting of some 08 drag radial race rules...but a 98 would be pretty sweet
![Nod](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_nod.gif)
The comp cover will be nearly indentical in size. Should fit in the same location. The exhaust housing is a touch larger though.
#43
TECH Fanatic
iTrader: (4)
Join Date: Mar 2004
Location: San Antonio
Posts: 1,886
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I hope my sarcasm detector took a crap... otherwise, let the man spend his money the way he likes!
If he wants a 1500rwhp streetcar with AC and a giant slurpy holder, than who the hell are you to tell him he's wrong in wanting such a car.
He wants options on reaching his goals... not opinions on whether you think it's a good goal to have!!
Quickin - All the power to ya! I really do hope you can make your car exactly the way you want it to be. I see absolutly no problem with wanting such a beast!
If he wants a 1500rwhp streetcar with AC and a giant slurpy holder, than who the hell are you to tell him he's wrong in wanting such a car.
He wants options on reaching his goals... not opinions on whether you think it's a good goal to have!!
Quickin - All the power to ya! I really do hope you can make your car exactly the way you want it to be. I see absolutly no problem with wanting such a beast!
im right there with you bro, but what kinda tire are you gonna use to make a 1500rwhp car stick on the street?
#44
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
So far all the BW units that use big compressors are huge 85-100lbs units that are physically much larger then even the 106mm.
#45
Launching!
Join Date: Apr 2007
Location: lynchburg va
Posts: 279
Likes: 0
Received 0 Likes
on
0 Posts
#47
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
![Devil](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_devil.gif)
![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
![](http://forcedinductions.com/images/turbopics/FI80X-122ciFordprotosmall.jpg)
#50
![Question](https://ls1tech.com/forums/images/icons/icon5.gif)
Tell ya what......can someone just tell me what single turbo kit, if there is one, will fit in the WS6 and be big enough to support and efficiently feed a 427ci? Forget the 454ci, no need to be that big. My engine builder will take care of the rest.
If noone knows I'll delete the thread.
.
If noone knows I'll delete the thread.
.
hang on a minute-how are people going to give u good input if u keep changing the cubes
1.481
2.454?
3.427 cubes>now-
the cubes does make a lot of difference for a turbo selection-
come to think about it-why dont u ask your engine builder what to do-it looks like its going to cost a lot of $$$ so why ask us????
#51
TECH Veteran
Thread Starter
Join Date: Dec 2001
Location: Ft. Lauderdale, FL, USA
Posts: 4,117
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
To be real honest we are not even selling the S95 anymore. Our customers just plain can not fit them. They are HUGE. They are almost 2" larger then even a 106 externally. If you can wait till after Christmas or so our new mini-thumpers will be out. We have the new ETT wheels all the way up to 100mm and all packaged around the size of a GT55. Compact and the ETT 100mm wheel will flow close to a 106mm GT-TV wheel, plus the unit will spool almost 700-900rpms faster as well. ![Devil](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_devil.gif)
Testing so far has been un-real. Our ETT 94mm made 40rwhp then a T101 and spool 800rpms sooner.![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
I personally would go with a 400ci engine or so and probably the FI94X or FI98X. The FI100X would probably be a little overkill for a street car.
![Devil](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_devil.gif)
Testing so far has been un-real. Our ETT 94mm made 40rwhp then a T101 and spool 800rpms sooner.
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
I personally would go with a 400ci engine or so and probably the FI94X or FI98X. The FI100X would probably be a little overkill for a street car.
What power level can be reached with say a 422ci or a 427ci?
What twins would you recommend for a 422ci or 427ci?
Say 1,400-1,500 RWHP is the goal.
.
#52
TECH Senior Member
iTrader: (21)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I heard from a little birdy you might be testing one of these also.....lol. Your other unit is done and flow tested. I think they will be calling you this upcoming week. We made some changes to the design to help spool up. These big turbine wheels are tough to get spooled....lol. The newer unit (FI@@X units) are going to be awesome!!!!
But right now delays are killing us from the casting foundry that makes the center section. The backlog is growing daily.....
![Devil](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_devil.gif)
Cool
![Devil](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_devil.gif)
Just let me know when it ships. PM me if ya don't have the adddrsss already (you should) or give me a ring. I'll me in TX next week for thanksgiving.
Kyle
#55
TECH Veteran
Thread Starter
Join Date: Dec 2001
Location: Ft. Lauderdale, FL, USA
Posts: 4,117
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
hang on a minute-how are people going to give u good input if u keep changing the cubes
1.481
2.454?
3.427 cubes>now-
the cubes does make a lot of difference for a turbo selection-
come to think about it-why dont u ask your engine builder what to do-it looks like its going to cost a lot of $$$ so why ask us????
1.481
2.454?
3.427 cubes>now-
the cubes does make a lot of difference for a turbo selection-
come to think about it-why dont u ask your engine builder what to do-it looks like its going to cost a lot of $$$ so why ask us????
I asked my builder today. He said I was nuts for doing a 481ci. He wants to build me an iron GM LSX blocked 422ci with All-Pro heads and a Hogan intake. He said it'll put down 1,500 RWHP on race gas and be VERY streetable and last a pretty long time. I sold my LSX block to a local guy a week ago, but me and him are buying 3 LSX blocks next week. He wants a couple for himself and I need another one to build my set-up. I sold my other one because I was going to get the tall deck LSX, and my builder said its not necassary for what I want, so now I need to buy another one. I also heard that the LSX short deck iron blocks might be in danger of stopping completely because of a falling out between GM and their supplier for the block, which is an off-shore country who makes it for GM. I also heard the tall deck LSX's might never happen. I hope all this is false.
So I might buy a couple LSX's next week just to have them.
I can care less about money at this point
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
.
#56
TECH Veteran
Thread Starter
Join Date: Dec 2001
Location: Ft. Lauderdale, FL, USA
Posts: 4,117
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I should just use what NRE used on his 1,500 hp 408ci he built for Hot Rod magazine that did the 1,500 mile trip stopping at 5 1/4 mile drag strips along the way 300 miles apart.......with no break downs.
But I gotta keep A/C.
.
#57
LS1 Tech Administrator
iTrader: (14)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I also heard that the LSX short deck iron blocks might be in danger of stopping completely because of a falling out between GM and their supplier for the block, which is an off-shore country who makes it for GM. I also heard the tall deck LSX's might never happen. I hope all this is false.
__________________
![](https://ls1tech.com/forums/signaturepics/sigpic210_1.gif)
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.
![](https://ls1tech.com/forums/signaturepics/sigpic210_1.gif)
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.
#58
TECH Veteran
Thread Starter
Join Date: Dec 2001
Location: Ft. Lauderdale, FL, USA
Posts: 4,117
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
GM owns the molds so I guess they can start up somewhere else if need be.
Either way, I'm gonna get 2-3 blocks just to have.
Why aren't you out partying on a Froday night....I'm on my way out right now.
Later.......
![Chug! Chug! Chug!](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_chug.gif)
.
#59
LS1 Tech Administrator
iTrader: (14)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
![Cheers!!](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_cheers.gif)
__________________
![](https://ls1tech.com/forums/signaturepics/sigpic210_1.gif)
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.
![](https://ls1tech.com/forums/signaturepics/sigpic210_1.gif)
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.
#60
TECH Senior Member
iTrader: (21)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
NRE uses twin 88's on a 454ci to make 2,300 FWHP, and built for street use.
I should just use what NRE used on his 1,500 hp 408ci he built for Hot Rod magazine that did the 1,500 mile trip stopping at 5 1/4 mile drag strips along the way 300 miles apart.......with no break downs.
But I gotta keep A/C.
.
I should just use what NRE used on his 1,500 hp 408ci he built for Hot Rod magazine that did the 1,500 mile trip stopping at 5 1/4 mile drag strips along the way 300 miles apart.......with no break downs.
But I gotta keep A/C.
.
Thats nothing.... my local buddy made more then that with less cubes..... but for the street thats retarded..... its a 10.5 Outlaw car and that mcuh power CAN NOT be controlled on the street and has no buisness there...
Everyone knows people who make insane HP and all it takes is $$$
Now to to it in a LSx it takes more $$ and to want A/C your prob going to have to pay $9-10K for a custom Turbo setup....maybe more....
I really wasnt impressed with NRE LS2.... thats only about 900rwhp... no project F-Bomb are talking about??? I thought that thing crashed and has never made a 1/4 pass.....