Ninetres 370ci ST80 build
#1
Ninetres 370ci ST80 build
So here is the official thread for my 3rd round with the turbo LS1 world. New street killer set-up is as follows:
370ci iron block ~9.2:1 (10-14psi will be used)
Weisco -11cc slugs
Compstar rods
GM crank
All H series coated bearings
AFR225s with mew GM 5-layer gaskets
BIG STENOD reverse split turbo cam
Yella terra rockers
ST80 turbo with race cover and updated oiling (1.1ex)
4" DP to cut-out
91 pump with ALKYCONTROL dual nozzle methanol kit
Rossler TH400 with 3k stall, spooled 9" with 3.25 gears
Thoughts? Opinions? Ideas? Comments.....etc?????
370ci iron block ~9.2:1 (10-14psi will be used)
Weisco -11cc slugs
Compstar rods
GM crank
All H series coated bearings
AFR225s with mew GM 5-layer gaskets
BIG STENOD reverse split turbo cam
Yella terra rockers
ST80 turbo with race cover and updated oiling (1.1ex)
4" DP to cut-out
91 pump with ALKYCONTROL dual nozzle methanol kit
Rossler TH400 with 3k stall, spooled 9" with 3.25 gears
Thoughts? Opinions? Ideas? Comments.....etc?????
Last edited by ninetres; 04-25-2008 at 12:07 AM.
#3
Eh, the stalled 400 and 9" kinda hide the power, but I just want her to scoot......and not break. I have a bad *** suspension set-up on my car and I haven't had any seat time to dial her in! Damn shortblock spun the mains before 3k miles and only had about 4 or 5 passes on it.
I need this pig to pull tire on the pavement
I need this pig to pull tire on the pavement
#6
I also have a set of ZR1 wheels for my real street driving. I usually keep junk sumitomo rubber on them because the spool chews them up so fast.....but I might pucker my cheeks for the new MT 315/35 drag radials. It would be fun to wax some people on a true low pro street tire.
Trending Topics
#9
I was shooting for Feburary, but I think March would be more realistic. The pistons should be at my door mid January, and then the assembly will start.
#10
10 Second Club
Join Date: Dec 2004
Location: slocala
Posts: 405
Likes: 0
Received 0 Likes
on
0 Posts
Not sure exactly. I just know I sent mine in about a month ago for the race cover swap, and they said they also ran some new CNC program on it. I guess it helps the oiling and in return helps spool. Not sure how "new" it is, as I have had my ST80 for almost 9 or 10 months I would imagine.
I was shooting for Feburary, but I think March would be more realistic. The pistons should be at my door mid January, and then the assembly will start.
I was shooting for Feburary, but I think March would be more realistic. The pistons should be at my door mid January, and then the assembly will start.
Sounds like its gonna be a badass setup, looking forward to the videos
#11
Staging Lane
Join Date: Jun 2007
Location: Temple Terrace/ Thonotosassa
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
sounds like it will be a nice build. with the trans brake it should be a rocket down the track. it will be intersting to see what kinda numbers it puts down.
#13
LS1Tech Sponsor
iTrader: (65)
Glad to see your sticking with it Ninetres! Should be even better this time around.... Your doing one thing right though, when it breaks you keep building it bigger and better than before!
__________________
Featuring 6 different turbo kits for your F-body!
Check us out on Facebook at: www.facebook.com/HuronSpeed
Featuring 6 different turbo kits for your F-body!
Check us out on Facebook at: www.facebook.com/HuronSpeed
#19
T5 blanket. You know I'll be in Sac (and Famoso) this year. My turbo is just a gravity feed to return oil. Most likely, the old motor spun the mains due to improper machine work on the main lines. Search my threads for "My motor is seized", it gets juicy towards the end
#20
Launching!
iTrader: (17)
Join Date: May 2006
Location: MN
Posts: 278
Likes: 0
Received 0 Likes
on
0 Posts
Should be a bad *** setup.
Mine will be very similar 370/S80/PP317's/9"3.08/th400
Not sure what injector to go with yet, if I can get away with a 70lbs I think it may even get decent gas millage.
If they would have had that ST80 when I bought my S80 I probably would have went that way.
What kind of converter are you going to use?
Mine will be very similar 370/S80/PP317's/9"3.08/th400
Not sure what injector to go with yet, if I can get away with a 70lbs I think it may even get decent gas millage.
If they would have had that ST80 when I bought my S80 I probably would have went that way.
What kind of converter are you going to use?