badass99ss

iTrader: (17)

I have used the search tool and have read threw 4pgs of info . What im looking for are pics of vacuum sources for your boost gauge. I'm thinking of runing it off of the booster line with my bypass or using the small port directly across from the booster port on back side of manifold. Can anybody post up some pics of their install, I need a visual.

GrandmasterCow

iTrader: (5)

That's where I ran mine, right off the booster line. I'll get a pic in a few for ya

badass99ss

iTrader: (17)

There are alot of boosted cars here......somebody has to have a pic!

hlaalu

iTrader: (3)

+1 i still need to hook mine up

02NBMFormula

iTrader: (6)

Reject

iTrader: (24)

what about that thing from when the AIR/EGR **** was installed, you know how when you take it off you have that bare vacuum line that you plug up that goes to the back of the intake, would that one work too?

badass99ss

iTrader: (17)

That is how I did mine...

tomz28

iTrader: (20)

that is ugly mine comes right off the back of the intake sorry no pics but take your time and make it look good its the lillte things that make your car stand out from the rest

sworaz

iTrader: (13)

Where does that rubber hose (the one the guage line is spliced into) go? That's not the AIR line...is it?

02NBMFormula

iTrader: (6)

that is the brake booster line.

i bet your's is beautiful tom. thanks for sharing

tomz28

iTrader: (20)

here is a pic of mine its very hard to see it ties in with the BOV line from the back of the intake i hope this helps

tomz28

iTrader: (20)

and a pic of my engine bay what do guys think

tomz28

iTrader: (20)

this is my gauge set up in side if you need some more ideas i hope this helps as well

02NBMFormula

iTrader: (6)

cool idea on the guages.

Tirefire

iTrader: (1)

My comes of the back of the intake and is run off a "T" fitting, I think..

GrandmasterCow

iTrader: (5)

thats line coming off booster vac line


T'd into the line off booster vac line, goes to boost guage and other end goes to BC & WG & BOV

SCREAMIN01SS

does anyone where was the gold colored t in the picture is made from (parts wise). I want to use the same thing but I don't know what the parts are

MadIceV8

iTrader: (12)

Thats what I was thinking as well for installing mine. I'm pretty sure it would work good (probably better then the booster line).

Reject

iTrader: (24)

home depot would have that in the plumbing section

ddnspider

iTrader: (26)

wow....9 threads up is my sticky with pics in the first post on where to reference it.