the ladies like em thick
so ill have to take some time off next week to make it happen
04-22-2008, 07:47 AM
#105
engine is in, did a few other things too.
had to pull it out a couple times. we were going on hopes and dreams that the pan would clear the kmember (bmr) and it does! (nearly)
had to grind the inside of the drivers side 'ear' of the power steering rack bracket a couple times now there is a 1/4" of room all around.
hopefully it will be running tonight
had to pull it out a couple times. we were going on hopes and dreams that the pan would clear the kmember (bmr) and it does! (nearly)
had to grind the inside of the drivers side 'ear' of the power steering rack bracket a couple times now there is a 1/4" of room all around.
hopefully it will be running tonight
04-22-2008, 08:07 AM
#106
TECH Senior Member
iTrader: (21)
Join Date: Nov 2001
Location: Cecil County Raceway!!!
Posts: 8,484
Likes: 0
Received 0 Likes
on
0 Posts
engine is in, did a few other things too.
had to pull it out a couple times. we were going on hopes and dreams that the pan would clear the kmember (bmr) and it does! (nearly)
had to grind the inside of the drivers side 'ear' of the power steering rack bracket a couple times now there is a 1/4" of room all around.
hopefully it will be running tonight
had to pull it out a couple times. we were going on hopes and dreams that the pan would clear the kmember (bmr) and it does! (nearly)
had to grind the inside of the drivers side 'ear' of the power steering rack bracket a couple times now there is a 1/4" of room all around.
hopefully it will be running tonight
04-25-2008, 06:55 AM
#107
update: car is done
had to put a new front main seal in yesterday afternoon. the seal was not replaced nor damper installed correctly during the rebuild at w2w
while i was in there i also found the cover was not clearanced for the timing chain. it took a little beating but i think is ok.
had to put a new front main seal in yesterday afternoon. the seal was not replaced nor damper installed correctly during the rebuild at w2w
while i was in there i also found the cover was not clearanced for the timing chain. it took a little beating but i think is ok.
04-25-2008, 02:26 PM
#111
TECH Resident
iTrader: (52)
Join Date: Jan 2004
Location: DFW
Posts: 809
Likes: 0
Received 0 Likes
on
0 Posts
update: car is done
had to put a new front main seal in yesterday afternoon. the seal was not replaced nor damper installed correctly during the rebuild at w2w
while i was in there i also found the cover was not clearanced for the timing chain. it took a little beating but i think is ok.
had to put a new front main seal in yesterday afternoon. the seal was not replaced nor damper installed correctly during the rebuild at w2w
while i was in there i also found the cover was not clearanced for the timing chain. it took a little beating but i think is ok.
Glad you got it worked out..
Good luck down there and don't fall to fighting without me! 
04-27-2008, 05:18 PM
#117
thanks to all the rpm members and friends that made it out to the beach with us. the car worked PERFECTLY thus far and seems dang fast for 13#
thanks to virginia speed for feeding us saturday night!
monday
k member clearancing / room
tuesday
remote filter
starter clearancing
new tops out roll bar look
yesterday
my buddy dennis took some HD engine and underpinnings shots i will link those when he gets them up.
thanks to virginia speed for feeding us saturday night!
monday
k member clearancing / room
tuesday
remote filter
starter clearancing
new tops out roll bar look
yesterday
my buddy dennis took some HD engine and underpinnings shots i will link those when he gets them up.
04-27-2008, 05:29 PM
#118
9 Second Club
iTrader: (17)
Join Date: Nov 2002
Location: New Braunfels ,Tx
Posts: 4,997
Likes: 0
Received 0 Likes
on
0 Posts
Looks great. Make sure to check you AN fittings on the supply and return on the pan. Mine came loose after about 250 miles. But all is well after I retightened them.
