APS installed...402ci
APS installed...402ci well its been a long time coming but its finally installed and running. still needs to be tuned and dyno'd etc but i figured id post some pics of the engine bay. i also fabed up the stock air lid assembly to cover up the intercooler...came out pretty decent and completely hides any trace of a intercooler.
here are some specs:
-ls2 402ci
-dragonslayer crank
-compstar rods
-15cc Diamond pistons
-arp bolts
-double roller
-slp oil pump
-bone stock L92 heads
-dual springs
-Yella Terra L92 rockers
-HSW custom turbo cam
-stock l76 intake w/NW 90
-Nasty Fuel rails
-60# injectors
-racetronix dual intank pump
-areomotive regulator
and im sure whole lot more that ive forgotten. im using stock heads as a little experiment but im sure ill end up swapping them out eventually for a set of trickflows. anyways....here are the pics....ill try to have a vid up as soon as we're ready to dyno.
before it went in:
installed:
and with the lid installed....what intercooler??!?!?
well...there ya have it. id like to thank Nick and Matt at HarrisSpeedWorks for all their Help. thanx JM for your insight on my recent issue...(figured out what the trouble was BTW).
ill have some vids posted up within the next few weeks as tuning gets done and more miles get put on the bran new engine.
thanx everyone
Rick
here are some specs:
-ls2 402ci
-dragonslayer crank
-compstar rods
-15cc Diamond pistons
-arp bolts
-double roller
-slp oil pump
-bone stock L92 heads
-dual springs
-Yella Terra L92 rockers
-HSW custom turbo cam
-stock l76 intake w/NW 90
-Nasty Fuel rails
-60# injectors
-racetronix dual intank pump
-areomotive regulator
and im sure whole lot more that ive forgotten. im using stock heads as a little experiment but im sure ill end up swapping them out eventually for a set of trickflows. anyways....here are the pics....ill try to have a vid up as soon as we're ready to dyno.
before it went in:
installed:
and with the lid installed....what intercooler??!?!?
well...there ya have it. id like to thank Nick and Matt at HarrisSpeedWorks for all their Help. thanx JM for your insight on my recent issue...(figured out what the trouble was BTW).
ill have some vids posted up within the next few weeks as tuning gets done and more miles get put on the bran new engine.
thanx everyone
Rick
Last edited by TNTramair; May 12, 2008 at 10:34 AM.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Joined: Dec 2003
Posts: 490
Likes: 1
From: Burlington, Ont. / North Van B.C.
Air Lid I have the Strage 2 kit on order, and what you have done with the air lid, I was going to do Exact same thing. I can't wait for the kit to arrive. I like the whole element of suprise!!!
WHAT air lid did you use/ cut up ,slp lid ???
nice job
Warren
