LS2 403 D1SC Procharged 'street driver'.
I was also able to get the Bigger K&N filter installed on the stock inlet hat hose of the D1SC between the front bumper facia and the driver side intercooler piping. I also removed the driver side fog light for a more direct air flow to the filter.
I made a manifold vacuum tree for all the items that need a vacuum supply that I did not have to worry about before the ATI Procharger install. Some of these items are the AIS Methanol Injection kit, boost recirc valve, Tial BOV, hobb switch for 2nd Walbro GS340, and Boost referenced FPR.
I made a manifold vacuum tree for all the items that need a vacuum supply that I did not have to worry about before the ATI Procharger install. Some of these items are the AIS Methanol Injection kit, boost recirc valve, Tial BOV, hobb switch for 2nd Walbro GS340, and Boost referenced FPR.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Idle clips and dyno charts coming as soon as I have time to post it all up.
It is running and everything is working properly right out of the gate, I guess I am lucky. Initial numbers are from 9 psi. I was hoping to make 12 psi.
I will take it to the track in a week or so and see what 9 psi is worth then worry about spinning it up.
Presently running a 7.25/3.55 pulley combo.
It is running and everything is working properly right out of the gate, I guess I am lucky. Initial numbers are from 9 psi. I was hoping to make 12 psi.
I will take it to the track in a week or so and see what 9 psi is worth then worry about spinning it up.
Presently running a 7.25/3.55 pulley combo.
LOOKS AWESOME, one question for you though? Where did you get the piece in this pic https://ls1tech.com/forums/attachmen...9&d=1220122555
Trying to find a way to mount up my Vortech Mondo bypass valve and I need a flange like that I suppose??
Trying to find a way to mount up my Vortech Mondo bypass valve and I need a flange like that I suppose??
LOOKS AWESOME, one question for you though? Where did you get the piece in this pic https://ls1tech.com/forums/attachmen...9&d=1220122555
Trying to find a way to mount up my Vortech Mondo bypass valve and I need a flange like that I suppose??
Trying to find a way to mount up my Vortech Mondo bypass valve and I need a flange like that I suppose??