8/15/03 - Pics of Griffin Race intercooler out of the box
#21
LS1Tech Sponsor
iTrader: (3)
Join Date: Nov 2001
Location: Mobile, AL
Posts: 1,001
Likes: 0
Received 0 Likes
on
0 Posts
Re: Pics of the new Griffin intercooler --------->
hey pugs, I just think that the newest GM optisparks are worse than ever. I've seen alot of them come apaart, and IMHO the metal piece is coming off the plastic rotor. I've had two break and both times it trashed the optical section (the disc is very fragile).. I'm not turning big RPM at all, 6500 is where the limiter is set..
__________________
1966 Chevy II twin turbo LS3 project
2016 Z07 Carbon
1966 Chevy II twin turbo LS3 project
2016 Z07 Carbon
#22
Re: Pics of the new Griffin intercooler --------->
I have had alot of problems with my optispark in my 94 and 97 z's someone told me alison electronics makes a replacement sensor for these i dont know if this is true but i did have one for my comp 9000 and sold the car after 4 years with the same unilite installed no problems.
#24
TECH Fanatic
iTrader: (19)
Re: Pics of the new Griffin intercooler --------->
Wow, that thing should do the job...looks like a nice piece...
hahah looks freakin sick john. cant wait for you to get that beast out to the track so someone can give me a decent run. we are gonna race heads the f' up. bring it.
#25
LS1Tech Co-Founder
Thread Starter
iTrader: (34)
Re: Pics of the new Griffin intercooler --------->
Znines (Chris) fabbed up the brackets for it and took the intercooler to get them welded on...
We will have pics of the intercooler mounted in the next couple of days...
We will have pics of the intercooler mounted in the next couple of days...
#29
LS1Tech Co-Founder
Thread Starter
iTrader: (34)
Re: Pics of the new Griffin intercooler --------->
Chris got the mounting tabs welded onto the intercooler and has almost completed the ducting.
Pics as soon as the ducting is done.
Pics as soon as the ducting is done.
#32
Re: Pics of the new Griffin intercooler --------->
John i got you some pics before the unit left the building over here any way that i could get some snaps shots before the rest of the ls1 community?
#35
LS1Tech Co-Founder
Thread Starter
iTrader: (34)
Re: Pics of the new Griffin intercooler --------->
Email Mbell@griffinrad.com for prices, Melissa handles sales. If you can find them a distributor and could coordinate a GP the early guys might get a break.
We ordered some silicone couplers from Sound Performance, we will take pics once we have those.
We ordered some silicone couplers from Sound Performance, we will take pics once we have those.
#37
Re: Pics of the new Griffin intercooler --------->
1-5 $840.00
5-20 $672.00
20-99 $560.00
100+ $480.00
Blanket orders will be accepted.
J
Melissa Bell
Inside Sales Rep.
Griffin Thermal Products
P#864/845-5000
F#864/845-5001
mbell@griffinrad.com
These prices are as of 08/28/03 and are subject to change when mounting provisions are provided.
5-20 $672.00
20-99 $560.00
100+ $480.00
Blanket orders will be accepted.
J
Melissa Bell
Inside Sales Rep.
Griffin Thermal Products
P#864/845-5000
F#864/845-5001
mbell@griffinrad.com
These prices are as of 08/28/03 and are subject to change when mounting provisions are provided.
#38
TECH Fanatic
iTrader: (3)
Join Date: Mar 2002
Location: Pontiac, MI
Posts: 1,364
Likes: 0
Received 0 Likes
on
0 Posts
Re: Pics of the new Griffin intercooler --------->
Do you guys know if that setup will work on a 93 LT1 Z-28? My friend has an F1 procharger and thinks he is blasting through the ATI intercoolers.
-Geoff
-Geoff
#39
LS1Tech Co-Founder
Thread Starter
iTrader: (34)
Re: Pics of the new Griffin intercooler --------->
Geoff, this Griffin is designed to work on all 4th gens.
The dimensions are:
4.59 x 13.85 x 30. That's 30 from inlet to outlet.
That ATI sheetmetal intercooler has maxed out by Kurt at Wheel to Wheel on a F1 383 LS1, they only got 22 psi out of it, and they had 27 going in.
The dimensions are:
4.59 x 13.85 x 30. That's 30 from inlet to outlet.
That ATI sheetmetal intercooler has maxed out by Kurt at Wheel to Wheel on a F1 383 LS1, they only got 22 psi out of it, and they had 27 going in.