TX RED

iTrader: (19)

damn i want to see some numbers so i can buy mine lol

ilikeredlights

I don't see these kits available any more on ebay
does anybody know whats up with that ?
there used to be people selling similar setups

Frost

iTrader: (45)

there's one on eBay now missing one of the tubular manifolds that claims that it will be the last kit sold...

Monello

iTrader: (1)

I wish he was just selling the manifolds so i can pick up an extra set for backup.

O well..

brianfromhawaii

iTrader: (3)

i know its an old thread, but im rockin the sts turbo kit right now and im tired of it, i want a front mount, turbos are designed to work HOT HOT HOT not all the way in the back of a car

KurtRardin

iTrader: (11)

There seems to be another set on ebay with no turbo, around the same price.

Dude, seriously, we need an update! I was searchin ebay and the kit i mentioned above reminded me of this thread... "hmmm I wonder what happened to monello?"

ModularTurbo

iTrader: (14)

Hey Monello hows my turbo holdin' up

98Camarod

iTrader: (43)

I ran my kit and had a best of 7.1@99mph spinning pretty bad, pulling 2 degrees of timing and I hit the rev limiter. I'd like to go again before I go onto shift work, but my last chance is Saturday and I have my 10 bolt out waiting for my 9" to arrive.

I've got some new slicks, I'll be leaving off of the 2 step, and I have the eboost 2. Should be in the 6's now

KurtRardin

iTrader: (11)

Thats pretty nasty...

98Camarod

iTrader: (43)

It was on 7lbs and I'll be running 10lbs next time. Hopefully I can get my 60' down in the 1.5's or maybe lower.

KurtRardin

iTrader: (11)

How was the ground clearance with this setup?

brianfromhawaii

iTrader: (3)

Read the thread, it was mentioned

MUSTANGBRKR02

iTrader: (91)

Camarod you planning on going to Fbody week in July? I would like to see your set up in person? Good luck with the 6's.

KurtRardin

iTrader: (11)

I've read every page since the beginning, I think I even asked Monello for the first GC pic. I'd love to see what the clearance is like on a non lowered car though. I remember it being pretty low on the crossover pipe, but I'd like to see some more angles, and maybe other peoples cars to see if there is some adjustment in the kits that may yield better clearance.

98Camarod

iTrader: (43)

Well my ground clearance is good, I run an open downpipe. Sorry, pics of my setup won't help you out.

XtremeDime

iTrader: (16)

Bringing this back! I dont know if PTK is still made but what about the kits on ebay currrently?

KurtRardin

iTrader: (11)

This thread will be banned if you keep those links up. I'm pretty sure they're the same as the one here anyway.

XtremeDime

iTrader: (16)

I ordered pretty much all my parts. Looks like were running damn near the same setup lol. Im going to go with the MP T-70 with .96 exhaust just waiting for Modular to get back to me on some shipping(Alaska sucks for shipping!)

98Camarod

iTrader: (43)

don't forget to get solid mounts

XtremeDime

iTrader: (16)

Wheres the best place to get those at?