MTI Racing F- Body Supercharger Kit
#21
F-Body Supercharger Kit By MTI Racing
Hey Guys,
Thanks for all the Buzz.
The Kit is based on a 122 supercharger.
A 1/4" drop of the K-member and cowl notch kit are included.
The Kit makes 8 lb. of Boost.
Thank You
Thanks for all the Buzz.
The Kit is based on a 122 supercharger.
A 1/4" drop of the K-member and cowl notch kit are included.
The Kit makes 8 lb. of Boost.
Thank You
Last edited by Stephen@MTI Racing; 07-02-2008 at 12:03 PM. Reason: wording
#24
#30
TECH Resident
iTrader: (1)
Join Date: Jan 2004
Location: Patterson, CA
Posts: 858
Likes: 0
Received 0 Likes
on
0 Posts
i know its intirely 2 different setups, but harrop did make the tvs 1320 to swap the m62 for the cobalt, all depends on who designs the housing, use TVS rotors but design a housing that can bolt up to the maggie manifold.
#33
#36
We appreciate your questions, and apologize that we are not on this thread as fast as the questions are coming in. We invite you to phone us at (770) 919-7774 if you have questions regarding your application.
The design of our Maggie kit for F-body has worked so well on the stock engine, that we are receiving a larger response and are looking forward to see what lies ahead after several builds on modified engines.
We have made an F.A.Q. page for you on our website, and building upon the page as questions arise.
Once again, please phone us during business hours to thoroughly answer your questions and to schedule your appointment.
Catfish, I thought you were stopping by last week so I can show you around?
The design of our Maggie kit for F-body has worked so well on the stock engine, that we are receiving a larger response and are looking forward to see what lies ahead after several builds on modified engines.
We have made an F.A.Q. page for you on our website, and building upon the page as questions arise.
Once again, please phone us during business hours to thoroughly answer your questions and to schedule your appointment.
Catfish, I thought you were stopping by last week so I can show you around?
#38
Like Yotaman, and Badmonkey stated, the only difference in the LM Speed kit and this one appears to be the snout and tb. LM Speed kit comes with the piece for the cowel, and you lower the k-member 3/4" instead of 1/4". I like the looks of the MTI snout and tb, but the tb appears to be on upside down, or to have switched sides with the throttle cable and the sensors. Price is lower on the MTI kit for purchase, but they get you with the install price. See what it goes up to after the first 10 are done.
#39
Like Yotaman, and Badmonkey stated, the only difference in the LM Speed kit and this one appears to be the snout and tb. LM Speed kit comes with the piece for the cowel, and you lower the k-member 3/4" instead of 1/4". I like the looks of the MTI snout and tb, but the tb appears to be on upside down, or to have switched sides with the throttle cable and the sensors. Price is lower on the MTI kit for purchase, but they get you with the install price. See what it goes up to after the first 10 are done.
Doug