Got my midwest Fab 9 in my Turbo TA
#1
Got my midwest Fab 9 in my Turbo TA
Alot of you followed my build. So here is the newest upgrades to the car.
The rear is a fab 9 from eric @ midwest chasis and performance. AMAZING!
If you are in the market for a rear end give him a shot, you will not regret it.
Anyways the rear consits of
Midwest chasis Fab 9
BackBrace
Spool
3.50 gear
35 Spline Axles
Longer 1/2 inch wheel studs
Black Powder Coat
Fill and drain plugs, and some other little goodies.
I also got a new chromoly torque arm, Chromoly rear sway, and new rear suspension.
The car is back on stock ls1 v8 springs, and competition engineering shocks. The car sits much meaner.
And the best part...... The pics.
let me know what you guys think.
The rear is a fab 9 from eric @ midwest chasis and performance. AMAZING!
If you are in the market for a rear end give him a shot, you will not regret it.
Anyways the rear consits of
Midwest chasis Fab 9
BackBrace
Spool
3.50 gear
35 Spline Axles
Longer 1/2 inch wheel studs
Black Powder Coat
Fill and drain plugs, and some other little goodies.
I also got a new chromoly torque arm, Chromoly rear sway, and new rear suspension.
The car is back on stock ls1 v8 springs, and competition engineering shocks. The car sits much meaner.
And the best part...... The pics.
let me know what you guys think.
Last edited by Sideways240sx; 12-05-2008 at 09:22 PM.
Trending Topics
#9
It wont be so raked out looking with a 15" rim and a properly sized tire. Also when the front suspension gets done it will look alot more even. Remember thats just stock height in the back, and 1" down in the front, its not as crazy as it seems in pics.
Sean
Sean
#11
These rims will hold me over till winter with the new tires. Then hopefully a set of drag rims.
What broke ef said about the suspension. Just a stock ls1 spring in rear, with comp engineering shock. Cant believe thats stock ride height...
Personally though i think it looks kinda mean.
Chris
#19
I just installed my rear last week its very very very nice. Mine weighs the same a the factory 10 bolt with the aluminum center section and tru trac and back brace.