Forced Induction Superchargers | Turbochargers | Intercoolers

Question about adding the FAST intake to my set-up??

Thread Tools
 
Search this Thread
 
Old Aug 3, 2008 | 06:56 AM
  #21  
MY99TAWS6's Avatar
TECH Veteran
iTrader: (3)
 
Joined: Apr 2002
Posts: 4,719
Likes: 3
From: Kelowna,BC
Default

Well I had my fast 90/90 combo before my aps kit was ordered and not selling it now. As said APS test mule was running like 20psi with fast 90/90 combo. And if you go to afr site you will find couple of mag build ups that were shooting for like 1000 engine hp that are using the fast 90/90 setup.
One even said they got more power from the fast over the other type or maybe just said they got a better powerband .

They didn't give hard numbers on the diffferences in power though in that article. That new street warrrior might be the intake to get. ls6 is also a decent choice. The fast being two piece is a bit of a pontential and said potential weak point. Some rtv might also be a good idea. I am not planning on past 20psi on my build and hopefully more like mid 15s for boost and maybe a 75 to 100 shot will get me to my 800 to 850 rwhp goal depending on if auto or m6.
Reply
Old Aug 3, 2008 | 10:37 AM
  #22  
Jake@EPP's Avatar
FormerVendor
 
Joined: Mar 2006
Posts: 1,540
Likes: 0
From: Hell AFB
Default

If your worried about the fast, comp sells a kit that has a new seal to replace the old one.
Reply
Old Aug 3, 2008 | 12:26 PM
  #23  
KWIKKAR's Avatar
Thread Starter
TECH Apprentice
iTrader: (15)
 
Joined: Apr 2007
Posts: 351
Likes: 0
From: Fort Worth, TX
Default

Well 1100whp is what the shop guy said. I'm down with 875rwhp. I'm not that picky.
Reply
Old Aug 5, 2008 | 05:38 PM
  #24  
KWIKKAR's Avatar
Thread Starter
TECH Apprentice
iTrader: (15)
 
Joined: Apr 2007
Posts: 351
Likes: 0
From: Fort Worth, TX
Default

Bummp
Reply




All times are GMT -5. The time now is 05:41 PM.