Got the Turbo and the A2W IC mounted
10-15-2008, 08:58 AM
#28
Coal Mining Director
iTrader: (17)
Join Date: Nov 2001
Location: Virginia
Posts: 4,442
Likes: 0
Received 0 Likes
on
0 Posts
Get us some data...I might be interested if you can custom make the inlets/outlets.
What's the pressure drop at 2000cfm or 180lbs/min?
What's the thermal drop at 2000cfm 400F inlet if 50F water is used with the 5.x gallon Chisel tank and pump?
TIA
10-17-2008, 05:00 PM
#29
LS1TECH Sponsor
Thread Starter
iTrader: (33)
Join Date: Jul 2002
Location: Out on the farm in Central IL
Posts: 4,399
Likes: 0
Received 0 Likes
on
0 Posts
Sorry for the delay, I've been out of town. Here is what I have on the Garrett cores used. This one is for a 1000 hp core.
The air-to-water cores were run with the following parameters:
Minimum Effectiveness = 70%
Boost pressure = 2.0 Bar
Charge inlet air temp = 350F
Charge outlet temp = 100F
Cooling fluid = 75F
Cooling fluid flow rate = 10gpm
Max flow = 100 lbs/min
pressure drop = 0.47 psi
I've got customers running them with temps in the 70-80's at the end of the runs,
The air-to-water cores were run with the following parameters:
Minimum Effectiveness = 70%
Boost pressure = 2.0 Bar
Charge inlet air temp = 350F
Charge outlet temp = 100F
Cooling fluid = 75F
Cooling fluid flow rate = 10gpm
Max flow = 100 lbs/min
pressure drop = 0.47 psi
I've got customers running them with temps in the 70-80's at the end of the runs,
