Forced Inductions Turbo Stress Test
#22
TECH Apprentice
iTrader: (2)
Join Date: Aug 2006
Location: OKC, OK & Hatteras Island, NC
Posts: 310
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
+1 for just stepping back and accepting the inevitable. Someone would have to have some huge marbles/no brains to start pulling stuff apart in that situation.
Amazing the turbo lasted with that heat.
Amazing the turbo lasted with that heat.
#25
9 Second Club
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Safe alternative...get the **** away from it !!!!!
If you have a large enough fir extinguisher that you can be sure it will do the job, then maybe it is worth the risk.
Id say more often than not, they stop with a rod out the side of the block.
If you have a large enough fir extinguisher that you can be sure it will do the job, then maybe it is worth the risk.
Id say more often than not, they stop with a rod out the side of the block.
#26
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Yup, this one stopped when the pistons decided to exit out the exhaust valves.
#27
Launching!
iTrader: (5)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
i feel his pain..........i had a throttle stick in my 67 buick GS special.i tried for a second to get it unstuck then ran like a bitch to the back of the car and just sat there.Not much you can do when the key wont shut it off and the battery cables dont cut it off.Bout the only thing you can do is what i did and call a tow truck.LOL i just waited for what seemed to be an eternity for it to just blow..
come to find out it was something that i took a shortcut on,needless to say i have never bought a important part used or tried to fab one up since....Im glad its a great built unit cause i have one of their turbo's and i do stupid stuff when im drunk.....sorry to hear about his lose..
come to find out it was something that i took a shortcut on,needless to say i have never bought a important part used or tried to fab one up since....Im glad its a great built unit cause i have one of their turbo's and i do stupid stuff when im drunk.....sorry to hear about his lose..
#29
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I work on diesels for a living, sometimes when the FNG's work on these things they dont adjust the throttle stop right and they stick wide open, it is scary, last year we had a rod shoot out the side of a detroit. We have a 1/2in thick metal plate with a handle we just throw over the turbo inlet to starve it of air......
#30
TECH Fanatic
iTrader: (12)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Diesels are a whole different animal when it comes to runaway! They will do their darnedest to keep chugging along until they pop. We watched a Duramax runaway the other day on the dyno. It popped the turbo and started feeding off the oil running to lube the turbo. Finally a LARGE fire extinguisher got it shut down, but it took nearly the whole bottle to bring it down. I recommend a guillotine shut-off, a manual fuel line shut-off, and a big supply of CO2.
#31
Launching!
iTrader: (1)
Join Date: Jun 2002
Location: San Luis Obispo, CA
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
just a question, I know that diesel's have a mechanical fuel pump to run at the ridiculous fuel pressures they run, but does that pump pull the fuel to the engine bay AND pressurize the rails? Or is there an intank pump to push the fluid up to mech. pump for pressurization?
#32
Launching!
iTrader: (2)
Join Date: May 2005
Location: Rochester Mn
Posts: 285
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
just a question, I know that diesel's have a mechanical fuel pump to run at the ridiculous fuel pressures they run, but does that pump pull the fuel to the engine bay AND pressurize the rails? Or is there an intank pump to push the fluid up to mech. pump for pressurization?
On a 12 valve Dodge, there's a mechanical lift pump that feeds the high pressure pump. On a 24v, there's an electric lift pump that feeds the injector pump. These fail often and take out the injector pumps on the 24v trucks.
For those curious,
Nick
#33
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Diesels are a whole different animal when it comes to runaway! They will do their darnedest to keep chugging along until they pop. We watched a Duramax runaway the other day on the dyno. It popped the turbo and started feeding off the oil running to lube the turbo. Finally a LARGE fire extinguisher got it shut down, but it took nearly the whole bottle to bring it down. I recommend a guillotine shut-off, a manual fuel line shut-off, and a big supply of CO2.
#35
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The one I listed does and is easily reset. One of the few things I have bought for my truck that I thought was worth the money.![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
People think LSXs are expensive. You can have a nice short block for what Dmax rods cost. LOL
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
People think LSXs are expensive. You can have a nice short block for what Dmax rods cost. LOL
#38
Launching!
iTrader: (1)
Join Date: Jun 2002
Location: San Luis Obispo, CA
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
1 reason is that the fuel is injected during the compression stroke so that the pressure inside the cylinder is much greater than when fuel is injected in a gasoline engine. But that doesn't necessitate 26kpsi. A major reason is that the higher pressure allows for better atomization of the fuel which means better combustion.
In a spark ignition engine, the flame front propagates outward from the spark plug and happens relatively fast. Fast enough that it's usually modeled as a constant volume with sudden pressure increase event. A diesel on the other hand, ignites when the compression causes the air in the cylinder to become hot enough that it ignites the fuel. Well, if the diesel fuel is atomized better thru injection at higher pressures, this SHOULD occur simultaneously throughout the cylinder. Typically diesels are modeled as a constant pressure w/volume change event. If the diesel could be ignited more uniformly and rapidly, then the pressure in the cylinder at TDC (or close to it) would be much greater and able to do more work on the piston as it goes down in the cylinder.
In a spark ignition engine, the flame front propagates outward from the spark plug and happens relatively fast. Fast enough that it's usually modeled as a constant volume with sudden pressure increase event. A diesel on the other hand, ignites when the compression causes the air in the cylinder to become hot enough that it ignites the fuel. Well, if the diesel fuel is atomized better thru injection at higher pressures, this SHOULD occur simultaneously throughout the cylinder. Typically diesels are modeled as a constant pressure w/volume change event. If the diesel could be ignited more uniformly and rapidly, then the pressure in the cylinder at TDC (or close to it) would be much greater and able to do more work on the piston as it goes down in the cylinder.