Bogging When Accelerating Through and Out of Turns
Bogging When Accelerating Through and Out of Turns Not sure which section to put this, so this is in a few different sections, but i autocross my car and need this fixed asap. So within the last few weeks i've noticed my car has a tendency to bog pretty bad when trying to accelerate out of turns. I'd downshift to second, go into the turn, and midway through to coming out out the turn, i'd give it gas and it wouldn't do anything then suddenly catch, studder a bit and go. Any idea what could cause this? Seems to be more prevalent taking right turns and in second gear, however that could just be me being over-thinking it a bit. Recently installed LS6 Intake Manifold, Ported and Polished Stock LS1 Throttle Body (that sticks a little when starting to give gas), and K&N FIPK.
1. Run the gauge on a hose long enuf to put the ga under the wiper, facing the driver.
2. Run the ga the same way, but on the pass side, and have the passenger watch/record what's happening. [probably safer!]
3. Safest.. Set up a transducer and record the fp on your scan/tune tool. [We use EFILIVE]
2. Run the ga the same way, but on the pass side, and have the passenger watch/record what's happening. [probably safer!]
3. Safest.. Set up a transducer and record the fp on your scan/tune tool. [We use EFILIVE]
