Fuel filter - plumbing the fuel lines question
11-17-2010, 11:15 PM
#1
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Jul 2010
Location: New York, Long Island
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Fuel filter - plumbing the fuel lines question So I am trying to run fuel to my LS1 iron block. I have a WIX 33737 fuel filter/regulator.
Wix fuel filter/reg Link: http://www.summitracing.com/parts/WIX-33737/
On the outlet side I will be running a stainless braided hose to the fuel rails. I have this hard line AN 3/8" hard tube to -6AN hose adapter.
Adapter Link: http://www.jegs.com/i/Russell/799/639200/10002/-1
Question is, how do I get the outlet from the fuel filter down to 3/8" hard tube so I can adapt the 3/8" tube to my -6AN braided hose? I did a search and came up with the below thread, and it looks like a Swagelok union was used to reduce the outlet to a 3/8" hard tube. I went to their site but am stumped as to which connector I need. I'm not sure why this is giving me so much trouble
Reference Thread: https://ls1tech.com/forums/conversio...ilter-fpr.html
Swagelok website: http://www.swagelok.com/
Thanks guys!
Wix fuel filter/reg Link: http://www.summitracing.com/parts/WIX-33737/
On the outlet side I will be running a stainless braided hose to the fuel rails. I have this hard line AN 3/8" hard tube to -6AN hose adapter.
Adapter Link: http://www.jegs.com/i/Russell/799/639200/10002/-1
Question is, how do I get the outlet from the fuel filter down to 3/8" hard tube so I can adapt the 3/8" tube to my -6AN braided hose? I did a search and came up with the below thread, and it looks like a Swagelok union was used to reduce the outlet to a 3/8" hard tube. I went to their site but am stumped as to which connector I need. I'm not sure why this is giving me so much trouble
Reference Thread: https://ls1tech.com/forums/conversio...ilter-fpr.html
Swagelok website: http://www.swagelok.com/
Thanks guys!
Last edited by redmen031; 11-17-2010 at 11:21 PM.
