TT402LS1

iTrader: (5)

Im looking to get 1000hp at the flywheel.(91 pump gas w/ meth) I was looking at Siemens Deka 80lbs High Impendece injectors. I know these will be boarder line for my goals. Are the high impendece injectors as good as the low's as far as tunning and performace goes?

Thanks - Ron

Lonnies Performance

iTrader: (16)

80's should be fine... they will likely support 1000 flywheel at 43.5psi base pressure.

TT402LS1

iTrader: (5)

High impendence work just as good as low impenedence as far as tunning goes?

Ron

FakeSnake

wondering the same thing... subscribed

Meemperor

iTrader: (3)

Low impedance injectors are faster than high's, but also require more current. In any case it's what your tuner is most comfortable with tuning. Lows with a proper digital driver box and tune will out perform highs, despite what some vendors may claim otherwise.

Higher current = more power = more force opening and closing the injector = faster operation. (In a vary basic manner of speaking!)

FakeSnake

what injector is everyone using that run a turbo and E85?

something like this?

http://www.summitracing.com/parts/TFS-89120/

TT402LS1

iTrader: (5)

Yes 120's