Fittings from T-Block to AN
#1
Teching In
Thread Starter
iTrader: (3)
Join Date: Apr 2009
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Fittings from T-Block to AN
Hello,
I have a 2000 fbody fuel tank I'm wanting to put into my 1987 Camaro. I'm wanting to keep the lines off the tank and just run one line up to the motor. How would I adapt the T-block to -6AN? I have included some pictures. Thanks.
I have a 2000 fbody fuel tank I'm wanting to put into my 1987 Camaro. I'm wanting to keep the lines off the tank and just run one line up to the motor. How would I adapt the T-block to -6AN? I have included some pictures. Thanks.
#3
TECH Fanatic
iTrader: (17)
If I remember correct I used a (14mm x 1.5 O-ring to -6AN) from Russel. You may want to double check the size.
http://www.summitracing.com/parts/rus-648070
http://www.summitracing.com/parts/rus-648070