New FP gauge ... acting weird ?
#1
TECH Resident
Thread Starter
iTrader: (3)
Join Date: Jun 2002
Location: Southern California
Posts: 886
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
My brand new Autometer electric Fuel Pressure gauge is acting differently so I cannot figure out which is normal. Maybe someone has some feedback on this matter.
Installed the gauge about 4 days ago, pressure was always constant at 60 psi, even when I shifted.
Today, everytime I shifted gears, it would drop down to 0 and then climb back to 60 psi about a second later.
So which is normal ? SHould the gauge drop to 0 when shifting or remain constant at a number
thanks
Installed the gauge about 4 days ago, pressure was always constant at 60 psi, even when I shifted.
Today, everytime I shifted gears, it would drop down to 0 and then climb back to 60 psi about a second later.
So which is normal ? SHould the gauge drop to 0 when shifting or remain constant at a number
thanks
#4
TECH Resident
Thread Starter
iTrader: (3)
Join Date: Jun 2002
Location: Southern California
Posts: 886
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by Trojan T/A
Poor Zoltan. I thought I had maybe helped you catch a break last Saturday with those gauges. Have you checked to make sure those fittings were still tight and not leaking any?
I will check them again today
![Embarassed](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_emb.gif)