Anything else I need for Racetronix intank system?
#1
TECH Fanatic
Thread Starter
iTrader: (3)
Join Date: Sep 2002
Location: Apopka, Fl
Posts: 1,197
Likes: 0
Received 0 Likes
on
0 Posts
Anything else I need for Racetronix intank system?
I just bought the Racetronix 255 intank system. I picked up the wiring harness also. Is there anything else that I will need...or is recommend for easy install or better function. I have a 01' SS...will my Fuel Pressure Regulator be ok?
Also, I picked up some Delphi/Lucas 42# injectors and fuel rails from Speed Inc. How is this for a fuel setup for a H/C car and a 100-150 shot of nitrous (wet)?
Also, I picked up some Delphi/Lucas 42# injectors and fuel rails from Speed Inc. How is this for a fuel setup for a H/C car and a 100-150 shot of nitrous (wet)?
#2
TECH Junkie
iTrader: (28)
Join Date: Jan 2004
Location: Houston
Posts: 3,250
Likes: 0
Received 0 Likes
on
0 Posts
That should be it. I just received the same kit and will start the installation tonight. I've read about a few guys here that cut an access hole in the rear deck, but I won't be doing that. I'll let you know how it goes.
#3
TECH Fanatic
Thread Starter
iTrader: (3)
Join Date: Sep 2002
Location: Apopka, Fl
Posts: 1,197
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TAQuickness
That should be it. I just received the same kit and will start the installation tonight. I've read about a few guys here that cut an access hole in the rear deck, but I won't be doing that. I'll let you know how it goes.
The injectors may be overkill...but I can afford them...so why not....you can never have enough insurance!!
#4
10 Second Club
iTrader: (27)
Join Date: Nov 2004
Location: Central NJ
Posts: 647
Likes: 0
Received 0 Likes
on
0 Posts
I just installed my racetronix pump and wiring harness simple as hell to install, you should have no problems very well designed kit, if you run into any problems shoot me a pm, good luck
#5
TECH Fanatic
Thread Starter
iTrader: (3)
Join Date: Sep 2002
Location: Apopka, Fl
Posts: 1,197
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by sickss228
I just installed my racetronix pump and wiring harness simple as hell to install, you should have no problems very well designed kit, if you run into any problems shoot me a pm, good luck
#6
Staging Lane
Join Date: May 2002
Location: Longwood, Fl.
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
Put mine in yesterday. Sweet set up! I ended up running the power wire through the interior by the rest of the wiring under the drivers side carpet. I didn't like the look of all those tie wraps down the fuel lines. I screwed the relay next to the black box by the wiring harness infront of the tank. Looks so factory, like it alot.
Trending Topics
#10
Ordered mine through Moore Performance....You should really check them out
I do like Thunder Racing, good guys, better than a few other sponsors. But check Moore out first.
Good luck. I should be putting mine in this weekend.
I do like Thunder Racing, good guys, better than a few other sponsors. But check Moore out first.
Good luck. I should be putting mine in this weekend.
#11
TECH Addict
iTrader: (11)
Originally Posted by 98,Ram,Air
Put mine in yesterday. Sweet set up! I ended up running the power wire through the interior by the rest of the wiring under the drivers side carpet. I didn't like the look of all those tie wraps down the fuel lines. I screwed the relay next to the black box by the wiring harness infront of the tank. Looks so factory, like it alot.
Where did you have the wire go through the firewall at on the drivers side?
Bill
#12
yeah, I got mine in today, and no directions ??? . I know the LT1 kit is different but someone needs to explain. I'm going to go try to mess w/ it in a sec and see if I can figure it out.
Mine got here in 3 days. Wasn't even ready yet
oh well. I'm taking pics and such to help others in the future but I gotta figure it out for myself first
Mine got here in 3 days. Wasn't even ready yet
oh well. I'm taking pics and such to help others in the future but I gotta figure it out for myself first
#13
LS1TECH Sponsor
iTrader: (2)
Originally Posted by csmonte
yeah, I got mine in today, and no directions ??? . I know the LT1 kit is different but someone needs to explain. I'm going to go try to mess w/ it in a sec and see if I can figure it out.
Mine got here in 3 days. Wasn't even ready yet
oh well. I'm taking pics and such to help others in the future but I gotta figure it out for myself first
Mine got here in 3 days. Wasn't even ready yet
oh well. I'm taking pics and such to help others in the future but I gotta figure it out for myself first
__________________
Manufacturer / Distributor of Automotive Fuel Systems, Components & Electronics
Please support a Racetronix dealer near you for personalized service.
>WEB SITE<
Manufacturer / Distributor of Automotive Fuel Systems, Components & Electronics
Please support a Racetronix dealer near you for personalized service.
>WEB SITE<