Aeromotive Eliminator pump install
#1
10 Second Club
Thread Starter
iTrader: (26)
Join Date: Nov 2005
Location: Conway, AR
Posts: 1,407
Likes: 0
Received 0 Likes
on
0 Posts
Aeromotive Eliminator pump install
Hey guys i am going to the Eliminator pump and Fuel pump controller. I have done a search but can't find where people are installing these big pumps. I was wanting to see if some of the guys running this pump can post some pics? I currently have the factory tank. I am thinking of putting 2 bulk head fittings in the tank. So please post up. Thanks.
#2
TECH Apprentice
iTrader: (1)
Join Date: Dec 2004
Location: Sarasota, FL.
Posts: 362
Likes: 0
Received 0 Likes
on
0 Posts
My pics wont help but I used a -10 fitting welded into my factory tank ("05 GTO). Pump under rear of car, pre and post filters and the pump controller is mounted in the trunk. 10 line splits at Y on the firewall the two -8 to rails. Then regulator to factory supply line for return.
#5
Staging Lane
Join Date: Apr 2007
Location: Melbourne, Australia
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
I will be doing this soon on a 01 Ls1 Turbo .
How did you wire up the tacho signal for the controller ? With a msd tacho adapter ? Which one ??
How did you wire up the tacho signal for the controller ? With a msd tacho adapter ? Which one ??
My pics wont help but I used a -10 fitting welded into my factory tank ("05 GTO). Pump under rear of car, pre and post filters and the pump controller is mounted in the trunk. 10 line splits at Y on the firewall the two -8 to rails. Then regulator to factory supply line for return.
Trending Topics
#8
TECH Senior Member
iTrader: (21)
John ran a 5.006 @151 in the 1/8. That's wicked fast for 360ci.
A lil easier with that 98mm turbo on there. Bridge ended up winning.
I'm almost back to my room. This is from my phone.
Kyle
#12
Anyone looking to replicate one of these kits? I'm selling my Brand new setup with pretty much everything you need!!! https://ls1tech.com/forums/showthrea...t=#post8179768