Post pics up of your aftermarket fuel system.
12-14-2007 | 03:56 PM
#41
Thread Starter
10 Second Club
iTrader: (27)
Joined: Nov 2006
Posts: 1,905
Likes: 0
From: Connecticut
Well I mean will it interfere with anything? Like the throttle cable or anything..i havent been able to go back and check cuz of the snow so im hoping it will work. And with how tight those fittings were..i seriously doubt it will leak.
12-15-2007 | 10:03 AM
#42
8 sec potential, 12 sec slip
iTrader: (50)
Joined: Apr 2002
Posts: 4,092
Likes: 2
From: Savannah, GA
Only thing I could see it interfering with is the steam vent tube that goes across the front of the heads and to the radiator, but you should be able to move the fuel line around enough to clear it once its installed.
12-15-2007 | 10:17 AM
#43
ChevyChad is correct...the only concern would be the steam vent tube. I failed to see that it was missing from the picture you showed...
Last edited by MeentSS02; 12-15-2007 at 10:36 AM.
12-15-2007 | 01:17 PM
#44
Thread Starter
10 Second Club
iTrader: (27)
Joined: Nov 2006
Posts: 1,905
Likes: 0
From: Connecticut
Yeah, I failed to see it missing when I was installing the cable. The only reason I didnt put it over the top is cuz I dont think there would be enough clearance between that and the hood(RX7)
