John Junkins

iTrader: (137)

I just finished installing and putting my car back together and the fuel pump sounds like it's priming, but I don't have any fuel pressure??? I followed the directions to the Tee. And YES I put gas back into the tank. Any help would be greatly appreciated.
Thanks, have a great Sunday Evening and God Bless Our Troops and the U.S.,
John Junkins

MIGHTYMOUSE

iTrader: (59)

you could have smashed or folded the plastic section of the pressure line putting the tank back in, or forgot to tighten one of the screw clamps and had the hose blew off in the tank, or you wired it backwards and its running backwards

John Junkins

iTrader: (137)

David,
That's a few things I thought it was. But I place the two wires in the holes according to the diagram. And I know I tighten the two hose clamps. As for the kink or fold in the line I will have to check. But I think I'm going to cut the hole in the hatch area, instead of dropping my tank again.
Thanks For the Info.
John Junkins