Vic Jr
Thread Starter
TECH Veteran
iTrader: (53)
Joined: Feb 2004
Posts: 4,433
Likes: 0
From: Monticello, Kentucky
Vic Jr Already have a set of LS1 fuel rails. Yes I know easy way is to get Vic Jr package with rails. But I've got a set of rails. Modding is no problem, is it an easy mod or not worth it?
Not worth it the Vic without rails has no injector holes. You would need to have the intake machined for the injectors. Just get the intake with the rails and sell your rails.
Nate
Nate
I've got a fuel injection style victor jr that the previous owner had modified to accept a standard rail... The Edelbrock rail mounts are crap in my opinion, and if he hadn't had this done, I'd have stuck with a fast 90/90 setup... I can post pics of the modifications if needed... I don't think, however, that it'd be a backyard project.... I know he took it to a machine shop so that it could be done properly and assure that the rails were at the proper height, witdth, angle, etc.
Trending Topics
does anyone know the demensions of the injector holes? i have a good deal lined up on a carb intake and have access to a mill to make the holes, i just need to know what size and everything to mill the holes.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo
If you're running LS2/LS3/LS7, you want 14mm holes... if LS1/LS6, 15mm holes.
I'm running an LS2/3/7 GMPP intake with my LS6 engine and changed to 14mm o-rings for the injectors.
I'm running an LS2/3/7 GMPP intake with my LS6 engine and changed to 14mm o-rings for the injectors.
