flowmatched injectors
Thread Starter
Joined: Oct 2005
Posts: 4,768
Likes: 26
From: Central Valley
flowmatched injectors well the cam is gettin closer to being install and i'm readin other posts and i'm seeing gettin flowmatched is alot better so i get the right amount of fuel to each cylinder, so with that being said who makes good 42lb flowmatched injectors and a price? if a sponsor has a price and would like to not post it a pm would be good 
thank you
john
thank youjohn
Last edited by King Nothing; Feb 8, 2009 at 11:57 AM.
well the cam is gettin closer to being instsall and i'm readin other posts and i'm seeing gettin flowmatched is alot better so i get the right amount of fuel to each cylinder, so with that being said who makes good 42lb flowmatched injectors and a price? if a sponsor has a price and would like to not post it a pm would be good thank you
john
thank youjohn
We have a special right now on brand new Bosch Design III 30's. Flow matched for $299 for the set of 8.
What crank HP are you looking at, I can run the #'s and find what injector would suit you.
What crank HP are you looking at, I can run the #'s and find what injector would suit you.
Thread Starter
Joined: Oct 2005
Posts: 4,768
Likes: 26
From: Central Valley
i'd like to see 400 or a bit more at the wheels with my set-up. mods include SLP lid, MAF, fernco bellows lol, LS6 manifold, pacesetter headers, !air! !egr! !cats!, ture duals with LM1 resonators out the back, coming before the cam goes in is a slp underdrive pulley and a 3400 circle D stall
Alright, 400WHP is roughly 480CHP through an auto, so I ran the #'s at 500 to give a touch of headroom.
I get a # of needing 33lb injectors at an 80% duty cycle to handle that. So 36's would probably be your best bet.
We can resize your stock injectors to that easily, would save you quite a bit of money as well as being much easier to tune.
I get a # of needing 33lb injectors at an 80% duty cycle to handle that. So 36's would probably be your best bet.
We can resize your stock injectors to that easily, would save you quite a bit of money as well as being much easier to tune.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo you can do prices for instance at www.racetronix.com and they are XX.XX per each... depending on what you want
I strongly suggest that you go with the 42s to give you a little extra capacity. If you go the minimum, you will regret it later. And the price quoted you for the 42s is very reasonable. Note: I have no buy-in on this transaction, just trying to see a forum member make a good decision.
Although I am currently running the Lucas disc injectors, and find them a quality piece.
Although I am currently running the Lucas disc injectors, and find them a quality piece.