I bought a fabricated Ford/Moser 9" rear. The sponsor says to use black permatex to create a seal between the housing and the 9" third member. I'd rather find the gasket part number that fits the Moser center section.
Anyone gone this route and can provide a P/N I can go to one of the national auto parts store and pick up?


Thanks...

 

Just go in and tell them you need a gasket for a Ford nine inch. Bob

 

Thanks Bob.

 

I just looker it up for mine. The good felpro one is pn# 2302 Its around $16.00 or you can get a cheaper felpro one without the steel core for $8.00

 

use the gasket and rtv.