2000 z28 rear end in a 68 Camaro??
#1
Teching In
Thread Starter
Join Date: May 2011
Location: San Diego
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
2000 z28 rear end in a 68 Camaro??
Hi all,
Before I start taking stuff apart, I am wondering if the rear end of a 2000 Z28 (the complete rear end) will work on my 68 camaro. I know there may be some adapting of the perches of course but has it been done before?
I got a 2000 Z28 with an auto tranny so if I can get away with using the rear end also, it would save me a bit off $$. I have the complete car. Thanks.
If anyone has done before, I would appreciate it I got pointed in the right direction.
Before I start taking stuff apart, I am wondering if the rear end of a 2000 Z28 (the complete rear end) will work on my 68 camaro. I know there may be some adapting of the perches of course but has it been done before?
I got a 2000 Z28 with an auto tranny so if I can get away with using the rear end also, it would save me a bit off $$. I have the complete car. Thanks.
If anyone has done before, I would appreciate it I got pointed in the right direction.
#2
LS1Tech Sponsor
iTrader: (16)
if you are talking about a oem 4th gen F Body 10 bolt, the question everyone has to be thinking when they read this is why? A 1st gen 10 bolt is much, much stronger than a 4th gen 10 bolt. Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
#5
LS1Tech Sponsor
iTrader: (16)
http://shop.brutespeed.com/Moser-9-I...Muscle-Pak.htm
Here is the Moser 9 inch rear that is designed to fit the 1st gen F Body. Bob
Here is the Moser 9 inch rear that is designed to fit the 1st gen F Body. Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
#6
LS1Tech Premium Sponsor
iTrader: (26)
Hi all,
Before I start taking stuff apart, I am wondering if the rear end of a 2000 Z28 (the complete rear end) will work on my 68 camaro. I know there may be some adapting of the perches of course but has it been done before?
I got a 2000 Z28 with an auto tranny so if I can get away with using the rear end also, it would save me a bit off $$. I have the complete car. Thanks.
If anyone has done before, I would appreciate it I got pointed in the right direction.
Before I start taking stuff apart, I am wondering if the rear end of a 2000 Z28 (the complete rear end) will work on my 68 camaro. I know there may be some adapting of the perches of course but has it been done before?
I got a 2000 Z28 with an auto tranny so if I can get away with using the rear end also, it would save me a bit off $$. I have the complete car. Thanks.
If anyone has done before, I would appreciate it I got pointed in the right direction.