rear end vibration's
07-20-2011, 05:05 AM
#1
TECH Enthusiast
Thread Starter
iTrader: (4)
Join Date: Apr 2008
Location: Home town Clive,IA current town FORT BENNING GEORGIA
Posts: 525
Likes: 0
Received 0 Likes
on
0 Posts
rear end vibration's well guys to start it off the car has been sitting for over a year before i got it out of my buddies shop. i had a new motor/k-member, sway bar, and sub frames. a few months before i put it away i had blew up my old 10-bolt and swapped it for a moser 9inch which leaks out of the drivers side axel tube.
we had it in the shop working on it i replaced the seal and it still leaks so my builder looked at it more in depth he said, when he came back and told me either the bearing is bad or the axel tube itself is bent.
thats just what i wanted to hear. he said he looked at the pinion angel and said it was fine but it is a lowered car with stock pan hard and stock tq arm...
we had it in the shop working on it i replaced the seal and it still leaks so my builder looked at it more in depth he said, when he came back and told me either the bearing is bad or the axel tube itself is bent.
thats just what i wanted to hear. he said he looked at the pinion angel and said it was fine but it is a lowered car with stock pan hard and stock tq arm... 
07-20-2011, 06:01 PM
#3
TECH Enthusiast
Thread Starter
iTrader: (4)
Join Date: Apr 2008
Location: Home town Clive,IA current town FORT BENNING GEORGIA
Posts: 525
Likes: 0
Received 0 Likes
on
0 Posts
possibly im not really sure the car gets put up next week for just about a year while ill be deployed
