Turnin20s

iTrader: (12)

Does anyone sell weld on LCA brackets for a 3" axle tube besides Moser? I would also consider a bracket that dropped the LCA a little lower than the Moser brackets do.

These are the ones I bought before:
http://www.byunspeed.com/product_inf...oducts_id=9752

I'm just looking for something a little more affordable and about 1" lower than the Moser bracket

BMR Sales2

iTrader: (40)

We manufacture weld-on lower control arm-relocation brackets that will for you. We have tons of these instock and ready to ship. Here is a link to them on our website.

Weld-on lower control arm relocation brackets (CAB001)

Turnin20s

iTrader: (12)

I need the whole LCA bracket, not just the relocation brackets

BMR Sales2

iTrader: (40)

Your best bet is probably going to be to contact either Moser or Strange and see what they have to offer.

Turnin20s

iTrader: (12)

Wow did you even read the post? Or just the title

MidwestChassis

iTrader: (5)

We have all the brackets off our fabricated housing we sell separately. Many people have purchased the hole bracket kit when building their own rear end.

Turnin20s

iTrader: (12)

Got any pictures of what they look like? And how much?

BMR Sales2

iTrader: (40)

Sure did buddy!

Turnin20s

iTrader: (12)

Sure did read the title

MidwestChassis

iTrader: (5)

I will put together some pricing for you on Monday as I don't have it in front of me and can't remember the cost.

It will be the same brackets we use on our fabricated housing. If you want to see some pics sooner than later look through the pics in our thread and then Monday I will try to post up some pictures as well for you.

Turnin20s

iTrader: (12)

I got some coming from a circle track shop They have 5 holes instead of the 4 hole Moser pieces and were half the price

Turnin20s

iTrader: (12)

Well got the brackets and they were wrong, Midwest you mind posting up some prices for the brackets? The axle is 3"

MidwestChassis

iTrader: (5)

I don't have any pictures of them separate right now but they will be the exact same brackets we use on our fabricated housings.

Items included in the kit.
Passenger side:
LCA 4 hole relocation bracket.
Shock mount bracket.
Spring perch.
Sway bar mount.

Drivers side:
LCA 4 hole relocation bracket.
Shock mount bracket.
PHB bracket with spring cup.
Sway bar mount.

Full kit is $350 shipped.

Fully assembled and welded, this means all you need to do is place them in the correct location and weld them onto the housing. I don't have any in raw form right now but he is in the process of starting to weld some together for customers housings and I will try to get some pictures for you.

Here is an example on one of our housings.

MidwestChassis

iTrader: (5)

Quick picture and these are not fully welded but the ones you receive will be.