A Strange 12 bolt Install
#21
11 Second Club
Join Date: May 2003
Location: USA-WEST MONROE, LOUISIANA
Posts: 631
Likes: 0
Received 0 Likes
on
0 Posts
Good write up. I order a complete Strange 12 volt rear end in 2008 and no issues whatsoever. I have 4:10 gears and it does not howl and is super quiet. I believe you will really like this package.
#36
Strange Rear
Did you order the rear stock length, or 2-3" shorter?
If you ordered it shorter, what reference measurement did you give to Strange? They told me that they wanted the dimension either between axle faces or backing plate faces.
Thanks.
If you ordered it shorter, what reference measurement did you give to Strange? They told me that they wanted the dimension either between axle faces or backing plate faces.
Thanks.
#39
11 Second Club
iTrader: (7)
I also have the strange 12 bolt but ive only had it for about a year. 3.42 gears. so far so good. didnt feel much heavier than the stock 10bolt but you can tell its much stronger. got it powdercoated so hopefully that lasts a while. torque arm mounted right up. only thing that sucks about it is theres no more side fluid fill so you have to add fluid from the cover and its harder that way because of the angle to get the fluid in there.
#40
TECH Senior Member
Thread Starter
iTrader: (96)
Join Date: Aug 2007
Location: Turnin' Wrenches Infractions: 005
Posts: 24,241
Likes: 0
Received 81 Likes
on
72 Posts
Strange machines the hole up top for the abs sensor whether you need it or not. Remove the sensor or plug and fill from the top if thats easier.