dwfronk

Ok i am set on a set of 4.10 gears i have a M6 and not so much of a DD but do drive it a lot. My question is there is a few diff gears on the market and i was looking at some motive gears. What is the difference in the Motive gears and the Motive Preformance Gears? And is anyone running these or some other brand and what is your thoughts and opinions of what your running? (i.e. louder, quieter, more dependable.)

Z28LOVER

iTrader: (8)

I just had motive performance 3.42 installed and so far it's been pretty quite. It's also all in the setup but happy so far.

ejbta2

I would go with gm gears I have an auto I run 3.73 no noise.

dwfronk

Yea i fig a lot of the noise would come from how it is set up.

Dose anyone else want to chime in on this?

heymoej

iTrader: (67)

01ssreda4 knows alot about motive gears....i thought i just read in another post where he clarified the differences in the motive gears about a week ago?

i have used them & they were fine....

just went from richmond to yukon gears & i am really liking the new yukons.......

good luck!

tonybain42

I've got a 98 camaro with a 370 in it and a 9" with 4.11.s and M6. You'll love the 4.10's in a daily driver, in 6th gear still only just over 2k at 70. I'm making 440 rwhp and best i've got was 23 mpg on the interstate going to my office. I'm sure it would do better if I didn't have the city driving added in, lol! I'm about to put Yukon or Motive gears in it because i'm changing to a truetrack and the gears in it now are noisy. any one tried both and comments?

01ssreda4

iTrader: (96)

Old thread but I prefer Motive Blue Box or stock replacements sets. Part # is GM75410 for 3 series 4.10s. The Orange box motives have the more aggressive cut gear and tend to be noisy IMO.

Ethan[ws6]

iTrader: (13)

as long as you get a good brand name you will have nothing to worry about.