VincesSS

iTrader: (1)

I'll be doing this as soon as I find the right 8.8 to start with.

squirlNUTZ

Me too. Salvages open here tomorrow and I'll be on the hunt.

k_cash1432

iTrader: (9)

Bumpin this up for Travis to see so maybe he will post some more pic up and get this lil project finished.

97badass

iTrader: (8)

Damn it kenny, you know on tuesdays I have to watch the kiddo so I cant get anything done with him... Hell Monday when the wife got home with him he ran straight for the torch saying preeeetttty. I've got my Buddys welder so tonight I can get something done if i dont have a heat stroke in the 97 degree weather.

k_cash1432

iTrader: (9)

Tell me about it, it was 92 today in gillette today and **** went down hill in a hurry when we had to give our track and time back at 1600... It was 1725 when we finnaly gave it back, im still waiting for the phone call with an *** chewing.

97badass

iTrader: (8)

Tell bnsf to suck it. They will be ok its only hour and a half!

97badass

iTrader: (8)

Those are just teaser pics till i get it done. I had to quit tonight after I got that side done since my 2 year old thought he needed to stick his hand in the gears while I was rotating the axle. And don't mind the bird **** welds I used a 110 flux core to tack it so i can take it to work to fully weld it.

01M6TA

iTrader: (1)

you dont think you needed a jig to keep everything straight and true? how much play is allowed with the axle into the carrier?

97badass

iTrader: (8)

I doubt its off enough to affect it very much if at all. And the clearance is about 1/2 I think

flintwrench69

iTrader: (11)

Perfect! Cant wait to see what the torque arm mount looks like.

k_cash1432

iTrader: (9)

Have you read any of the thread?

Hes doing mini ladder bar setup, so their is no TA. His axle tubes from the 10bolt fit snug into the tubes of the 8.8 so i doubt there is gonna be much issues with alignment.

97badass

iTrader: (8)

Ok the rearend is finished, I will do some editing of the thread and posting the pictures.

Guitar

iTrader: (9)

Waiting!

97badass

iTrader: (8)

there ya go guitar
just have another pic or 2 to put on

k_cash1432

iTrader: (9)

What no badass pic of the welds???

97badass

iTrader: (8)

97badass

iTrader: (8)

they are just mig spot welds looks tig welded

Guitar

iTrader: (9)

Nice man! Can't wait to hear how it feels when you get it installed.

97badass

iTrader: (8)

I need to save up $400 first for the bearing kit, girdle cover, carbon clutch kit, and the dom tubing and rod ends for the Pete z bars to get this baby movin out

cantfind2nd

iTrader: (24)

I would of used a truing bar or jig..... also the mini ladder bar ride and handling sucks... im using hiltsy mount , nice piece.