gears and axles again
Thread Starter
Teching In
Joined: Nov 2012
Posts: 29
Likes: 0
gears and axles again i understand with a 4'11 and up u need a torsen split block peddle, to put in the center of the worm whole carrier. i have been looking non stop.
does a 390 ring and pinion fit with a split block peddle?
i cant find any solution this mess that i am in. any body know of where i can get one.?
thanks tony
https://ls1tech.com/forums/images/sm...r_driving3.gif
does a 390 ring and pinion fit with a split block peddle?
i cant find any solution this mess that i am in. any body know of where i can get one.?
thanks tony
https://ls1tech.com/forums/images/sm...r_driving3.gif 
SLP split paddles HAVE NOT been available for quite a while now.
Most just modify/grind their existing paddle.
how/where to grind
https://ls1tech.com/forums/gears-axl...ddle-pics.html
Most just modify/grind their existing paddle.
how/where to grind
https://ls1tech.com/forums/gears-axl...ddle-pics.html
Thread Starter
Teching In
Joined: Nov 2012
Posts: 29
Likes: 0
grinding the teeth on the gear will make it happen right? do u have an idea of how many teeth you have to grind down. i would guess 3 on, any part of the gear thats not being used in the rotation sequence.
grinding the teeth will also work as the areas of the teeth that will be removed will not be in the mesh/pattern area. I've done it.
3.90s' are an unknown as they're not a common gear upgrade and those that have done 3.90s' have not reported the installation results.
3.90s' are an unknown as they're not a common gear upgrade and those that have done 3.90s' have not reported the installation results.
