LS1TECH - Camaro and Firebird Forum Discussion

Gears & Axles Driveshafts | Rearends | Differentials | Gears | 12 Bolt | 9 Inch | Dana

Moser 9 wheel wobble

Thread Tools
 
Search this Thread
 
Old Jul 13, 2013 | 09:21 PM
Share
  #1  
FormulaTA327's Avatar
FormulaTA327
Thread Starter
12 Second Club
15 Year Member
 
Joined: Dec 2008
Posts: 319
Likes: 0
From: Richmond,VA
Default Moser 9 wheel wobble
How bad does this wobble look, on narrowed moser 9 inch, passenger side, going to get video of just the axles tomorrow.

Reply
0
Old Jul 14, 2013 | 12:20 AM
Share
  #2  
Duffster's Avatar
Duffster
11 Second Club
iTrader: (103)
 
Joined: Aug 2005
Posts: 2,633
Likes: 1
From: South of West Point Iowa
Default
don't see much from the wheel as I do the tire on the wheel...
Reply
0
Old Jul 14, 2013 | 12:44 AM
Share
  #3  
alexus6798's Avatar
alexus6798
TECH Enthusiast
iTrader: (24)
 
Joined: Oct 2010
Posts: 731
Likes: 0
From: Plano, TX
Default
^That's what I was thinking also^ It's kinda hard to tell though..
Reply
0
Old Jul 14, 2013 | 02:52 AM
Share
  #4  
Duffster's Avatar
Duffster
11 Second Club
iTrader: (103)
 
Joined: Aug 2005
Posts: 2,633
Likes: 1
From: South of West Point Iowa
Default
I wouldn't sweat it. Do 40 and 'feel' for it... do 50... so on... I don't think you'll notice.
Reply
0
Old Jul 14, 2013 | 10:06 AM
Share
  #5  
FormulaTA327's Avatar
FormulaTA327
Thread Starter
12 Second Club
15 Year Member
 
Joined: Dec 2008
Posts: 319
Likes: 0
From: Richmond,VA
Default
Could any of you hear the the rotors hitting the brake pads, might have been hard to hear though, that's what it's doing, it sounds like it rubbing on one spot of the rotor every time the wheel makes a complete turn
Reply
0
Old Jul 14, 2013 | 10:23 AM
Share
  #6  
alexus6798's Avatar
alexus6798
TECH Enthusiast
iTrader: (24)
 
Joined: Oct 2010
Posts: 731
Likes: 0
From: Plano, TX
Default
Originally Posted by FormulaTA327
Could any of you hear the the rotors hitting the brake pads, might have been hard to hear though, that's what it's doing, it sounds like it rubbing on one spot of the rotor every time the wheel makes a complete turn
Do you still have E-brake? Mine was hitting a little and had to adjust it out some. What type of wheel and lugs do you have? May not be centered good. Just a thought.
Reply
0
Old Jul 14, 2013 | 12:36 PM
Share
  #7  
sportfan's Avatar
sportfan
10 Second Club
15 Year Member
iTrader: (1)
 
Joined: Jan 2008
Posts: 81
Likes: 0
Default
Do you have press in studs?
Reply
0

Trending Topics

Old Jul 14, 2013 | 01:24 PM
Share
  #8  
FormulaTA327's Avatar
FormulaTA327
Thread Starter
12 Second Club
15 Year Member
 
Joined: Dec 2008
Posts: 319
Likes: 0
From: Richmond,VA
Default
They are moser axles, I believe the studs are pressed in, I have the e brake still and didn't think about that, I have the acorn style lug nuts, they came with the custom torque thrust 2s that are 17x11, made sure that I tightend them in a star pattern. Il post a vid of just the axles later today
Reply
0
LS1 Tech Stories

The Best V8 Stories One Small Block at Time

story-0

Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin

 Verdad Gallardo
story-1

6 Common C5 Corvette Failures and What's Involved In Repairing Them

 Pouria Savadkouei
story-2

Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph

 Verdad Gallardo
story-3

Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked

 Pouria Savadkouei
story-4

Top 10 Most Powerful Chevy Trucks Ever Made!

 
story-5

Hennessey's New Supercharged Silverado ZR2 Has 700 HP

 Verdad Gallardo
story-6

Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes

 Verdad Gallardo
story-7

Awesome K5 Blazer Restomod Comes With C7 Corvette Power

 Verdad Gallardo
story-8

10 Camaros You Should Never Buy

 
story-9

10 LS Engine Myths That Refuse to Die

 Verdad Gallardo
Old Jul 14, 2013 | 01:59 PM
Share
  #9  
sportfan's Avatar
sportfan
10 Second Club
15 Year Member
iTrader: (1)
 
Joined: Jan 2008
Posts: 81
Likes: 0
Default
If the knurl of your pressed in studs extend beyond the axle flanges, check to see if your rotors sit flat on the axle itself. This has been a problem in the past with other members on this site. It is a simple matter of relieving your rotor hat to accomodate the knurl. This happened to me on some after market studs. Hope this helps.
Reply
0
Old Jul 14, 2013 | 08:22 PM
Share
  #10  
FormulaTA327's Avatar
FormulaTA327
Thread Starter
12 Second Club
15 Year Member
 
Joined: Dec 2008
Posts: 319
Likes: 0
From: Richmond,VA
Default
Thanks for the info sportfan, il have to look at that.
Reply
0
Old Jul 15, 2013 | 11:00 PM
Share
  #11  
FormulaTA327's Avatar
FormulaTA327
Thread Starter
12 Second Club
15 Year Member
 
Joined: Dec 2008
Posts: 319
Likes: 0
From: Richmond,VA
Default
Here is a video of the driver axle

Reply
0
Old Jul 16, 2013 | 01:46 PM
Share
  #12  
SparkyJJO's Avatar
SparkyJJO
TECH Senior Member
15 Year Member
Photogenic
Liked
Loved
iTrader: (11)
 
Joined: Aug 2007
Posts: 7,364
Likes: 85
From: Ohio
Default
Not a pro but it looks OK to me. I agree with the other poster, looks almost like it is more the tire than the wheel or axle moving.
Reply
0
Old Jul 16, 2013 | 07:34 PM
Share
  #13  
FormulaTA327's Avatar
FormulaTA327
Thread Starter
12 Second Club
15 Year Member
 
Joined: Dec 2008
Posts: 319
Likes: 0
From: Richmond,VA
Default
If its more the tire, does that mean its a defective tire, should that be something of concern
Reply
0
Old Jul 22, 2013 | 08:10 PM
Share
  #14  
Duffster's Avatar
Duffster
11 Second Club
iTrader: (103)
 
Joined: Aug 2005
Posts: 2,633
Likes: 1
From: South of West Point Iowa
Default
Only if you feel it at speeds... Try slow speed and see if you can feel it. Gradually step up the speed. By the look, you shouldn't feel it.

GL
Reply
0
Old Jul 23, 2013 | 05:01 PM
Share
  #15  
FormulaTA327's Avatar
FormulaTA327
Thread Starter
12 Second Club
15 Year Member
 
Joined: Dec 2008
Posts: 319
Likes: 0
From: Richmond,VA
Default
Update, I have put 18 miles on it so far, I can't really tell If there's a wobble from these shitty streets here, I still haven't got around to checking the wheels studs to see if the shoulders are hitting the rotor, so far everything sounds good except for my suspension making a bunch of noise
Reply
0
Back to Subforum
Gears & Axles
View Next Unread
How do you remove axle tubes from 10 bolt




Advanced Search

All times are GMT -5. The time now is 03:34 PM.

story-0
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin

Slideshow: This heavily modified 1971 Camaro mixes classic muscle car styling with a fifth-generation Camaro interior and modern LS3 power.

By Verdad Gallardo | 2026-05-12 18:06:42


VIEW MORE
story-1
6 Common C5 Corvette Failures and What's Involved In Repairing Them

Slideshow: From wobbling harmonic balancers to failed EBCMs, these are the issues that define long-term C5 ownership and what repairs typically involve.

By Pouria Savadkouei | 2026-05-07 18:44:57


VIEW MORE
story-2
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph

Slideshow: A modern Camaro transformed into a retro icon, this limited-run "Bandit" build blends nostalgia with brute force in a way few revivals manage.

By Verdad Gallardo | 2026-04-21 13:57:02


VIEW MORE
story-3
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked

Slideshow: Cadillac didn't just crash the high-performance luxury vehicle party, it showed up loud, supercharged, and occasionally a little unhinged...

By Pouria Savadkouei | 2026-04-16 10:05:15


VIEW MORE
story-4
Top 10 Most Powerful Chevy Trucks Ever Made!

Slideshow: Top ten most powerful Chevy trucks ever made

By | 2026-03-25 09:22:26


VIEW MORE
story-5
Hennessey's New Supercharged Silverado ZR2 Has 700 HP

Slideshow: Hennessey has turned the Silverado ZR2 into a 700-hp off-road monster with supercharged V8 power and a limited production run.

By Verdad Gallardo | 2026-03-24 18:57:52


VIEW MORE
story-6
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes

Slideshow: A one-off sports car that looks like a vintage Italian exotic-but hides a C6 Corvette underneath-just sold for the price of a new mid-engine Corvette.

By Verdad Gallardo | 2026-03-23 18:53:41


VIEW MORE
story-7
Awesome K5 Blazer Restomod Comes With C7 Corvette Power

Slideshow: A heavily reworked 1972 K5 Blazer swaps its off-road roots for a low-slung street-focused build with modern V8 power.

By Verdad Gallardo | 2026-03-09 18:08:45


VIEW MORE
story-8
10 Camaros You Should Never Buy

Slideshow: There are thousands of used Camaros on the market but we think you should avoid these 10

By | 2026-02-17 17:09:30


VIEW MORE
story-9
10 LS Engine Myths That Refuse to Die

Slideshows: Which one of these myths do you believe?

By Verdad Gallardo | 2026-01-28 18:10:11


VIEW MORE